More from this brand
Compact Robot for Automatic Floor Cleaning
AgiBot C2P is an autonomous cleaning robot designed for regular cleaning of indoor areas approximately 500–1,000 m² in size. The model performs sweeping, vacuum cleaning, dry mopping, and wet washing, automatically selecting the mode according to the type of surface and task. The robot recognizes carpeted areas, can operate under furniture if there is enough clearance, and supports remote task management via a cloud platform. For automation between cycles, a station with charging, clean water refilling, dirty water draining, and roller brush self-cleaning is provided.
Advantages of AgiBot C2P
- Four cleaning modes. The robot performs sweeping, vacuum cleaning, dry mopping, and floor washing. Switching between modes occurs automatically depending on the type of surface and task.
- Automatic carpet recognition. The system identifies carpeted areas and adjusts the cleaning method without using wet washing.
- Edge cleaning. The working width is 390 mm, and the distance to the edge during passage is less than 50 mm.
- Operation under furniture. The body height is 680 mm, and a clearance of at least 700 mm is required to pass under furniture or other structures.
- Overcoming small obstacles. The robot can overcome obstacles up to 30 mm high and move on surfaces with an incline of up to 8°.
- Remote control. The cloud platform supports task management, work performance analysis, and data visualization.
- Automatic station operation. After returning, the robot can charge, refill clean water, drain dirty water, and initiate roller brush self-cleaning.
Four Cleaning Modes of AgiBot C2P
The model supports sweeping, vacuum cleaning, dry mopping, and floor washing. The system automatically selects the appropriate mode depending on the type of surface and the task at hand.
A separate carpet recognition function allows automatic adjustment of the cleaning method. On carpeted areas, wet washing is not applied, while for compatible hard floors, modes using water are available.
Cleaning Hard and Carpeted Surfaces
AgiBot C2P can work with several common types of floors:
- Carpeted surfaces. The robot automatically recognizes carpeted areas and switches to the appropriate cleaning method without wet washing.
- Marble. Suitable for regular cleaning of smooth hard surfaces in commercial and public spaces.
- PVC flooring. Cleaning of polymer floors in offices, stores, and other indoor areas is supported.
- Ceramic tiles. The robot can clean tiled surfaces with automatic selection of the appropriate mode.
The working method is determined by the type of surface, so the set of active modes for hard and carpeted surfaces differs.
Maneuverability of AgiBot C2P
The robot's dimensions are 520 × 510 × 680 mm, allowing it to work between furniture, shelves, commercial equipment, and other objects in the room. A free space of at least 700 mm is required to pass under furniture or structures.
The robot overcomes obstacles up to 30 mm high and can move on surfaces with an incline of up to 8°. The movement speed is 0.4–0.6 m/s. During cleaning along walls and other boundaries of the working area, the distance to the edge can be less than 50 mm, reducing the area of sections that require additional cleaning.
Autonomy and Quiet Mode of AgiBot C2P
The cleaning performance is 180–250 m²/h depending on the selected mode and working conditions. In washing mode, the robot can operate for up to 4 hours, with one fully filled clean water tank lasting up to 2 hours of continuous cleaning.
The clean water tank has a capacity of 4 L, the dirty water tank 3.5 L, and the waste container 1.3 L. Full battery charging takes about 2 hours.
For cleaning in areas with increased noise level requirements, the Quiet Wet Mopping mode is provided. During its operation, the noise level is less than 60 dB, making this mode convenient for offices, apartments, and other spaces where it is important not to create excessive noise. The indicator <60 dB specifically refers to the Quiet Wet Mopping mode.
Cloud Management and Work Control
AgiBot C2P supports remote control via a cloud platform. Through it, tasks can be managed, work performance viewed, data analyzed, and cleaning results controlled. For moving between available building zones, the robot can also interact with elevators and access control systems, allowing work to be organized in multiple areas without constant manual equipment relocation.
AgiBot C2P Station
The multifunctional station automates the main operations between cleaning cycles. After returning, the robot can:
- automatically charge;
- refill the clean water tank;
- drain dirty water;
- initiate roller brush self-cleaning.
If it is not possible to organize a stationary water supply connection at the site, a mobile water supply station can be used. The availability of such equipment in a specific configuration should be clarified before ordering.
Where AgiBot C2P Can Be Used
The model is designed for small commercial and public spaces where regular automatic cleaning of various types of floors is required:
- Supermarkets. Cleaning aisles, sales floors, and other accessible areas.
- Office buildings. Cleaning corridors, open workspaces, and common areas.
- Serviced apartments. Regular cleaning of corridors and common areas between residential units.
- Retail stores. Cleaning sales areas, aisles, and areas near shelves.
- Exhibition halls. Cleaning exhibition areas and aisles between stands.
- Office lobbies. Regular cleaning of entrance areas and spaces with constant foot traffic.
Technical Specifications of AgiBot C2P
| Parameter | Value |
| Movement speed | 0.4–0.6 m/s |
| Dirty water container volume | 3.5 L |
| Clean water container volume | 4 L |
| Working time in washing mode | up to 4 hours |
| Continuous operation with a full water tank | up to 2 hours |
| Charging time | 2 hours |
| Waste container capacity | 1.3 L |
| Distance from the edge | <50 mm |
| Obstacle height | 30 mm |
| Cleaning width | 390 mm |
| Minimum free space height | 700 mm |
| Cleaning area | 180–250 m²/h |
| Battery capacity | 23 Ah |
| Net dimensions | 520 × 510 × 680 mm |
| Net weight | 22.5 kg |
Operating Recommendations
- Check the water level. Before a long cycle, monitor the supply of clean water and the state of the dirty water tank.
- Regularly clean the waste container. Its capacity is 1.3 L, so it is worth regularly checking the container's condition.
- Monitor working elements. Hair, threads, and other debris should be removed from brushes and mops.
- Ensure free access to the station. The robot's return route should not be obstructed by furniture or other items.
- Consider passage height. For operation under furniture and structures, a free space of at least 700 mm is required.
- Consider the type of floor. Different cleaning methods are used on carpeted and hard surfaces.
Order the AgiBot C2P Cleaning Robot
Order AgiBot C2P to automate cleaning in offices, stores, apartments, and other small commercial and public spaces. Our specialists will help clarify the configuration, station option, and conditions for implementing the robot at your site.
