More from this brand
Compact Robot for Daily Floor Cleaning
AgiBot C2 is an autonomous cleaning robot designed for regular cleaning of small indoor spaces. The model performs sweeping, vacuum cleaning, and wet mopping, automatically selecting the mode of operation according to the type of surface and dirt. The body, approximately 39 cm high, allows cleaning under tables, shelves, and other furniture if there is enough free space. For automation, a station is provided through which the robot charges, refills clean water, drains dirty water, empties the waste container, and dries the mop.
Advantages of AgiBot C2
- Three cleaning methods. The robot performs sweeping, vacuuming, and wet mopping. The mode of operation can automatically change according to the type of floor.
- Compact body. The height of about 39 cm allows it to go under tables, shelves, and other furniture if there is enough free space.
- Performance of 300–700 m²/h. This range is suitable for regular cleaning of offices, stores, lobbies, and other small commercial premises.
- Edge cleaning. The working width is 390 mm, and the distance to the edge during passage is no more than 50 mm.
- Automatic mode selection. The system determines the type of debris and the level of contamination and accordingly adjusts the cleaning method.
- Interaction with building infrastructure. Interaction with elevators, automatic doors, and access control systems is provided.
- Automatic station operation. The robot can independently charge, refill water, drain dirty water, empty the container, and dry the mop.
Vacuum Cleaning and Wet Mopping
AgiBot C2 combines sweeping, vacuum cleaning, and wet mopping. The mode of operation changes automatically depending on the type of surface and the nature of the dirt, so during one route, the robot can use different modes. The cleaning width is 390 mm, and when moving along walls and other boundaries of the working area, the distance to the edge can be up to 50 mm. The waste container has a capacity of 1.3 L. For wet cleaning, there are separate tanks for clean water with a capacity of 4 L and dirty water with a capacity of 3.5 L.
Compact Body for Cleaning Under Furniture
The body height is about 39 cm, allowing the robot to work in places that are harder to reach with standard floor cleaning equipment. With enough clearance, AgiBot C2 can go under tables, shelves, racks, and other furniture. This design is convenient for stores, offices, apartments, and other spaces with a lot of furniture or commercial equipment.
Automatic Mode Selection and Route Management
During cleaning, the system determines the type of surface, the nature of the debris, and the level of contamination, then adjusts the cleaning method. To move between different zones of the building, the robot can interact with elevators, automatic doors, and access control systems. This allows organizing cleaning of several accessible zones without constant manual movement of the equipment.
AgiBot C2 Station
The station automates the main operations between cleaning cycles. After returning, the robot can perform:
- automatic charging;
- refilling the clean water tank;
- draining dirty water;
- automatic emptying of the waste container;
- mop drying.
The station's container capacity is 10 L, and its weight is 38 kg. This system reduces the number of manual operations during daily use.
Where AgiBot C2 Can Be Used
The model is aimed at small and medium-sized indoor areas where regular automated cleaning is needed:
- Office buildings. Cleaning corridors, open work areas, and other indoor spaces.
- Serviced apartments and aparthotels. Cleaning corridors, common areas, and spaces between residential units.
- Retail stores. Regular cleaning of sales areas, aisles, and zones near shelves.
- Supermarkets. Cleaning aisles and other accessible areas of the sales floor.
- Exhibition halls. Cleaning open exhibition areas and aisles between stands.
- Office lobbies. Regular cleaning of entrance areas and spaces with constant foot traffic.
Cleaning Hard and Carpeted Surfaces
AgiBot C2 can work with several common types of floors. The cleaning method is selected according to the surface:
- Carpeted surfaces. Sweeping and vacuum cleaning are used for such surfaces without wet mopping.
- Marble. Suitable for regular cleaning of smooth hard floors in public and commercial spaces.
- PVC flooring. The robot can work with polymer floors in offices, stores, and other indoor areas.
- Ceramic tiles. Cleaning of tiled surfaces in commercial and public spaces is supported.
The specific mode depends on the type of surface, so sweeping, vacuum cleaning, and wet mopping are applied according to the surface properties.
Performance and Autonomy of AgiBot C2
The cleaning performance is 300–700 m²/h depending on the mode and working conditions. The duration of wet cleaning reaches 4 hours, and battery charging takes about 2 hours. The movement speed is 0.4–0.6 m/s. The robot can move on surfaces with an incline of up to 10°, which should be considered when planning the route between different areas of the room. The battery has a capacity of 25 Ah.
Technical Specifications of AgiBot C2
| Parameter | Value |
| Waste container capacity | 1.3 L |
| Maximum incline | 10° |
| Dirty water tank capacity | 3.5 L |
| Clean water tank capacity | 4 L |
| Washing duration | 4 hours |
| Charging time | 2 hours |
| Cleaning width | 390 mm |
| Distance from edge | ≤50 mm |
| Movement speed | 0.4–0.6 m/s |
| Cleaning performance | 300–700 m²/h |
| Station container capacity | 10 L |
| Battery capacity | 25 Ah |
| Automatic charging | Yes |
| Automatic water refilling and draining | Yes |
| Automatic container emptying | Yes |
| Mop drying | Yes |
| Station weight | 38 kg |
| Net weight | 17.5 kg |
Operating Recommendations
- Ensure free access to the station. The return route should not be blocked by furniture, boxes, or other items.
- Monitor the condition of the tanks. Periodically check the clean and dirty water tanks, especially before long working cycles.
- Clean working elements. Hair, threads, and other debris should be regularly removed from elements that contact the floor.
- Check the waste container. Even with automatic emptying, its condition should be monitored during regular inspections.
- Consider furniture height. Before starting a route under tables or shelves, make sure there is enough height for the body, which is about 39 cm high.
- Consider the type of surface. Different cleaning methods are used for carpeted and hard surfaces.
Order AgiBot C2 Cleaning Robot
Order AgiBot C2 to automate floor cleaning in offices, stores, apartments, and other commercial spaces. Our specialists will help clarify the configuration, station capabilities, and conditions for implementing the robot at your facility.
