Menu
Your Cart

3D Printer Raise3D T700 Large Build Volume

3D Printer Raise3D T700 Large Build Volume
3D Printer Raise3D T700 Large Build Volume
3D Printer Raise3D T700 Large Build Volume
New Free Training
3D Printer Raise3D T700 Large Build Volume
3D Printer Raise3D T700 Large Build Volume
3D Printer Raise3D T700 Large Build Volume
3D Printer Raise3D T700 Large Build Volume
  • Stock: In Stock
  • Product code: 827588000004356206
  • Weight Brutto: 185.00kg
98 990 zł
Ex Tax: 80 480 zł

Raise3D T700 industrial 3D printer for large-format printing

Raise3D T700 —  is an industrial FFF 3D printer for producing large parts, functional prototypes and production tooling. The 700 × 500 × 1000 mm build area makes it possible to print items up to one metre tall. The TwinFlow system feeds two filaments through a single nozzle. The maximum print speed is 600 mm/s, the nozzle temperature is 420 °C, and active chamber heating up to 60 °C helps maintain stable temperature conditions.

Large enclosed 3D printer on wheeled supports with a glass front, build platform, screen and red emergency button
Combines a glass chamber and touchscreen control. The enclosed large-format printer on castors has a build platform, a touchscreen and a red emergency stop button.

Advantages of the Raise3D T700 3D printer

  • High part production speed. The print speed reaches 600 mm/s, the print head acceleration is 30,000 mm/s², and the maximum travel speed is 1500 mm/s.
  • Flexible extrusion mode settings. The TwinFlow system has two filament feed channels and one shared nozzle. It supports single-extruder and dual-extruder modes, as well as the Dual Extrusion High Flow high-throughput mode.
  • Efficient material extrusion. The TwinFlow system delivers a volumetric melt flow of up to 80 mm³/s, depending on the temperature, filament type and nozzle parameters.
  • Ability to print with engineering and reinforced filaments. The nozzle heats up to 420 °C and has a wear-resistant silicon carbide (SiC) tip, which allows work with various categories of materials.
  • Stable temperature conditions during printing. Active chamber heating up to 60 °C helps reduce temperature differences and the risk of part warping.
  • Reliable part retention on the platform. The platform heats up to 120 °C, has a double-sided PEI coating and supports Mesh Leveling, which automatically compensates for surface unevenness.

TwinFlow extrusion system for dual-material printing

The TwinFlow extrusion system has two independent filament feed channels connected by a Y-shaped manifold. This design makes it possible to use two material flows without switching between separate nozzles. Three operating modes are provided:

  • Single Extrusion — printing with one filament through one channel.
  • Dual Extrusion — using two channels for compatible materials, including a main and a support material.
  • Dual Extrusion High Flow — a mode with increased volumetric melt flow.

The maximum extrusion throughput is 80 mm³/s. The standard nozzle has a diameter of 0.6 mm, and a 0.4 mm option is also available. The CuCrZr alloy base ensures heat transfer, while the silicon carbide (SiC) tip increases resistance to abrasive wear.

Two enclosed 3D printers of different sizes side by side, the larger T700 and the smaller T450
Exceeds the smaller model in size. The enclosed large-format Raise3D T700 stands next to the smaller T450.

Speed and accuracy of Raise3D T700 3D printing

The Raise3D T700 prints at speeds of up to 600 mm/s. The maximum travel speed of the head without extrusion is 1500 mm/s, with an acceleration of 30,000 mm/s². The operating parameters are selected according to the model geometry, filament type, layer height and permissible volumetric flow.

For the standard 0.6 mm nozzle, the specified layer height is 0.3 mm. The print accuracy corresponds to tolerance grade IT11 based on test results with Raise3D Premium PLA material.

Chamber heating and platform temperature control

The Raise3D T700 build chamber is equipped with active heating up to 60 °C, which helps control polymer cooling and reduce the risk of part warping. The platform heats up to 120 °C by means of a silicone heating element. The flexible double-sided plate with PEI coating makes it easier to remove finished items, and the Mesh Leveling system compensates for unevenness of the build surface. The design also includes an electric top cover, an auxiliary heat dissipation module and a HEPA filter with an activated carbon layer.

Filaments for the Raise3D T700 industrial 3D printer

The Raise3D T700 supports 1.75 mm diameter filaments from three Raise3D series:

  • Hyper Speed: PLA, PLA Pro, ABS, PETG CF, PET CF.
  • Industrial: PPA CF, PET Support, PPS CF.
  • Premium: PLA, ABS, ASA, PETG, TPU-95A.

Support for PPA GF, PET CF, PET GF, PETG ESD, PPA Support and PVA+ has also been announced. Before printing, check the material compatibility, nozzle configuration, temperature parameters and the availability of a profile in ideaMaker.

A large wheel rim with detailed spokes in a person's hands inside the chamber of an enclosed 3D printer
Prints a spoked wheel rim. A person holds a large printed rim in the chamber of the enclosed printer.

Video monitoring and automatic print process control

The Raise3D T700 is equipped with two cameras for monitoring printing. The main camera has a resolution of 1920 × 1080 pixels, and the nozzle camera 2592 × 1944 pixels. The monitoring system supports the following functions:

  • Filament Run-out Detection — detection of filament running out.
  • Power-loss Recovery — resuming printing after a power interruption.
  • Flow Rate Detection — monitoring of material feed.
  • Spaghetti Detection — detection of defects with chaotic layering of plastic strands.
  • Nozzle Clumping Detection — detection of melt accumulation around the nozzle.

These functions help monitor the condition of the equipment and detect deviations in good time while parts are being produced.

Preparing 3D models in ideaMaker and controlling the printer

Models are prepared using the Raise3D ideaMaker slicer, which is used to configure print parameters, support structures and material profiles. The software supports the STL, OBJ, 3MF, OLTP, STEP, STP, IGES and IGS formats and runs on Windows, macOS and Linux.

The printer is controlled via a 7-inch touchscreen with a resolution of 1024 × 600 pixels. Wi-Fi, Ethernet and USB 3.0 are provided for connectivity. The controller runs on Debian and has 2 GB of RAM and 32 GB of built-in storage.

A person removes a bulky curved black item from the open build chamber of a large-format 3D printer
Accommodates a large part. The operator removes a large black curved part from the chamber of the enclosed printer.

Using the Raise3D T700 in production and prototyping

The large-format build area, the TwinFlow system and support for engineering filaments make it possible to use the Raise3D T700 for the following tasks:

  • Functional prototypes. Printing housings, mounting panels and test samples for checking geometry and assembly.
  • Production tooling. Manufacturing jigs, clamps and fixtures for positioning parts.
  • Equipment enclosure components. Printing protective covers, lids and other large-sized components.
  • Engineering mock-ups. Creating scale models of structures, mechanisms and industrial products.
  • Auxiliary parts. Manufacturing holders, guides and brackets from materials selected according to the operating conditions.
Raise3D T700 — a video presentation of the large-format industrial 3D printer.

Raise3D T700 technical specifications

Main technical specifications

Parameter Value
Printing technology FFF
Build area 700 × 500 × 1000 mm
Frame material Aluminium alloy
Extrusion system TwinFlow, two feed channels and one nozzle
Extrusion modes Single Extrusion, Dual Extrusion, Dual Extrusion High Flow
Standard nozzle diameter 0.6 mm
Optional nozzle diameter 0.4 mm
Nozzle material CuCrZr base, SiC tip
Maximum nozzle temperature 420 °C
Filament diameter 1.75 mm
Layer height 0.3 mm
Print accuracy Grade IT11
Print speed 600 mm/s
Head travel speed up to 1500 mm/s
Head acceleration up to 30,000 mm/s²
TwinFlow volumetric flow up to 80 mm³/s
Build platform Flexible double-sided plate with PEI coating
Levelling system Mesh Leveling with flatness detection
Platform heating element Silicone
Maximum platform temperature 120 °C
Active chamber heating Yes
Maximum chamber temperature 60 °C
Electric top cover Yes
Auxiliary heat dissipation module Yes
Air filtration HEPA filter with activated carbon

Software and control

Parameter Value
Software Raise3D ideaMaker
Supported file formats STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS
Machine code format GCODE
Compatible operating systems Windows, macOS, Linux
Connectivity interfaces Wi-Fi, Ethernet, USB
USB port USB 3.0 × 1
Ethernet port 1
Wi-Fi protocols WPA, WPA2, WPA3-PSK
Touchscreen 7 inches
Display resolution 1024 × 600
Main camera 1920 × 1080 pixels
Nozzle camera 2592 × 1944 pixels
Filament run-out sensor Yes
Power-loss recovery Yes
Material flow monitoring Yes
Spaghetti defect detection Yes
Detection of plastic build-up on the nozzle Yes
Motion controller STM ARM Cortex-M7, 550 MHz, DP-FPU
Logic controller RK ARM Cortex-A55, 4 cores, 2 GHz
RAM 2 GB
Built-in storage 32 GB
Controller operating system Debian
Electric door lock Yes
Neural processing unit Up to 1 TOPS, INT8

Power supply and operating conditions

Parameter Value
Power supply 200–240 V AC, 50/60 Hz
Rated parameters 230 V, 16 A
Operating ambient temperature 15–30 °C
Operating relative humidity 10–90 %
Storage temperature From -25 to +55 °C
Relative humidity during storage 10–90 %
Net dimensions 964 × 792 × 1478 mm
Gross dimensions 1150 × 1060 × 1685 mm
Net weight 150 kg

Order the Raise3D T700 industrial 3D printer

Buy the Raise3D T700 for large-format 3D printing of functional prototypes, housing parts, engineering mock-ups and production tooling. Our specialists will help you choose the equipment configuration and compatible materials, and advise you on technical specifications and delivery arrangements.

Key Parameters
Type Large-format industrial FFF 3D printer
Enclosed chamber Yes
Build volume class IT11 grade
Number of hotends TwinFlow
Max print speed (mm/s) 600
Max hotend temperature (°C) 420
Build volume (X×Y×Z) (mm) 700 × 500 × 1000
Features Power-loss recovery, filament run-out sensor, flow rate detection, spaghetti detection, nozzle clumping detection, mesh-leveling with flatness detection, AI monitoring, NPU
Active chamber heating (°C) 60
Filament diameter (mm) 1.75
Nozzle diameter (default) (mm) 0.4
Max bed temperature (°C) 120
Max acceleration (mm/s²) 30 000
Supported materials PLA, PLA Pro, ABS, PETG CF, PET CF, PPA CF, PET Support, ASA, TPU-95A
Display Flexible double-sided PEI build plate
Air filter HEPA
Network Wi-Fi, LAN/Ethernet, USB 3.0, live camera
Compatible slicers ideaMaker
File formats STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS
Country of origin China
Warranty period (months) 12
Weight & Dimensions
Dimensions netto (mm) 880 × 772 × 1 076
Weight netto (kg) 150
Weight brutto (kg) 80
Dimensions Brutto (mm) 1150 × 1060 × 1685

Write a review

Please login or register to review