- Stock: In Stock
- Product code: T450
- Weight Brutto: 80.00kg
Raise3D T450 Large-Format 3D Printer
Raise3D T450 is a large-format 3D printer for producing functional prototypes, production tooling and structural parts using FFF technology. The 450 × 350 × 400 mm build volume makes it possible to create large parts without splitting them into separate elements. The TwinFlow system, with two filament feed channels and a single nozzle, supports three extrusion modes. A nozzle temperature of up to 420 °C and a chamber temperature of up to 70 °C make it possible to print with standard and engineering thermoplastics.
Advantages and Features of the Raise3D T450
- Large-format 3D printing. The 450 × 350 × 400 mm build volume is suitable for producing large housings, functional prototypes, tooling and mechanical components.
- TwinFlow extrusion system. Two independent filament feed channels are connected to a single nozzle via a Y-shaped manifold. Three extrusion modes are provided for different printing tasks.
- High-speed part production. The maximum print speed reaches 600 mm/s, and the print head acceleration is 30,000 mm/s². Actual figures depend on the material and settings.
- Four-motor motion mechanism. A motion system with four motors provides controlled positioning of the print head when working with large models.
- Air Flow Manager thermal control. The system manages the temperature conditions in the build chamber according to the selected material and print profile.
- Printing with engineering plastics. A nozzle temperature of up to 420 °C, a bed temperature of up to 120 °C and active chamber heating of up to 70 °C make it possible to work with a variety of technical thermoplastics.
- Nozzle with a wear-resistant tip. The copper-chromium-zirconium alloy CuCrZr base provides heat transfer, while the silicon carbide SiC tip has increased resistance to abrasive wear.
- Automated print monitoring. Cameras and sensors track the production process, monitor filament feeding and help detect extrusion faults.
- Job preparation in ideaMaker. The software supports print parameter settings, work with material profiles and model preparation. Files can be transferred via Wi-Fi, Ethernet and USB.
TwinFlow System with Three Extrusion Modes
The Raise3D T450 uses TwinFlow technology, which combines two filament feed channels with a single print nozzle. Materials arrive through a Y-shaped manifold, and the operating mode is selected depending on the part design and printing requirements. The system supports three modes:
- Single extrusion - printing using one material feed channel.
- Dual extrusion - operation with two feed channels through a shared nozzle.
- Dual extrusion with increased flow - a mode for increasing the volumetric material feed.
The maximum TwinFlow volumetric flow rate is 80 mm³/s. This figure was obtained in a test with Raise3D Hyper Speed ABS V2 at a temperature of 250 °C with a 0.4 mm nozzle. Actual performance depends on the filament properties, part geometry and print parameters.
Build Volume and Printer Design
The large-format Raise3D T450 3D printer makes it possible to produce housing elements, mounting fixtures, prototypes of mechanical assemblies and production tooling in a single cycle. The 450 × 350 × 400 mm build volume reduces the need to split large models into parts and assemble them afterwards. An aluminium alloy frame forms the basis of the machine's structure. For printing, a flexible double-sided build plate with a PEI coating is provided, which makes it easier to remove finished parts after cooling. The bed levelling system detects flatness deviations and creates a compensation mesh. This makes it possible to account for unevenness of the build surface when applying the first layer.
Active Chamber Heating and Temperature Control
The Raise3D T450 is equipped with an active heating system for the build chamber of up to 70 °C. The maximum bed temperature is 120 °C, and the nozzle temperature is 420 °C. These parameters make it possible to adjust the temperature mode according to the requirements of standard and engineering materials. The Air Flow Manager is responsible for managing the temperature conditions. The system supports the thermal control modes required for working with different types of filament. The printer's design also includes an electric top cover and an auxiliary heat removal module. A HEPA filter with activated carbon is used for air filtration.
3D Printing Materials for the Raise3D T450
Raise3D T450 supports a wide choice of the manufacturer's filaments from the Hyper Speed, Industrial and Premium series. The Hyper Speed range includes PLA, PLA Pro, ABS, PETG CF and PET CF, designed for high-speed 3D printing. The Industrial series is represented by the engineering materials PPA CF, PET Support and PPS CF, while Premium includes PLA, ABS, ASA, PETG and flexible TPU-95A. The choice of plastic depends on the intended purpose of the part, mechanical loads and operating temperature conditions. In the standard configuration, the printer is equipped with a 0.4 mm diameter nozzle, and a 0.6 mm nozzle is additionally available. For stable printing, it is necessary to take into account the compatibility of the filament with the nozzle diameter, the support material and the corresponding profile in the ideaMaker software.
ideaMaker Software and 3D Print Monitoring
For preparing digital models, the Raise3D T450 uses the ideaMaker software. The program allows you to select the part orientation, configure print parameters, create supports and work with material profiles. The printer is controlled via a 7-inch touchscreen with a resolution of 1024 × 600 pixels. For visual monitoring, a main camera and a separate nozzle-monitoring camera are installed. The monitoring system includes:
- a filament runout sensor;
- detection of material flow faults;
- detection of plastic stringing;
- monitoring of material build-up near the nozzle;
- print recovery after a power loss.
Wi-Fi, Ethernet and USB are available for connection and job transfer.
Applications of the 3D Printer
The Raise3D T450 is designed for producing parts that require a large build volume, a choice of thermoplastics and print parameter settings tailored to the part design. The main areas of use:
- Functional prototypes. Production of test samples of housings, mechanical assemblies and individual components for design verification.
- Production tooling. Printing of jigs, clamps, assembly fixtures and auxiliary production tools.
- Housings and protective elements. Creation of equipment covers, panels, housing parts and mounting structures.
- Low-volume production. Production of functional components in small batches without the use of moulds.
- Engineering design. Printing of parts for verifying geometry, mechanism assembly and compatibility of individual design elements.
For each task, the material is selected taking into account mechanical properties, operating temperature, required rigidity and the operating conditions of the part.
Raise3D T450 3D Printing and Design Specifications
| Parameter | Value |
| Printing technology | FFF |
| Build volume | 450 × 350 × 400 mm |
| Frame material | Aluminium alloy |
| Extrusion system | TwinFlow, two feed channels and one nozzle |
| Nozzle diameter | 0.4 mm |
| Optional nozzle diameter | 0.6 mm |
| Nozzle material | CuCrZr base, SiC tip |
| Maximum nozzle temperature | 420 °C |
| Filament diameter | 1.75 mm |
| Layer height | 0.2 mm with a 0.4 mm nozzle |
| Printing accuracy | Grade IT11 |
| Maximum print speed | 600 mm/s |
| Maximum head travel speed | 1500 mm/s |
| Maximum head acceleration | 30,000 mm/s² |
| Maximum TwinFlow volumetric flow rate | 80 mm³/s |
| Build plate | Flexible, double-sided, PEI |
| Bed levelling | Mesh levelling with flatness detection |
| Bed heating element | Silicone heating element |
| Maximum bed temperature | 120 °C |
| Active chamber heating | Yes |
| Maximum chamber temperature | 70 °C |
| Electric top cover | Yes |
| Auxiliary cooling module | Yes |
| Filtration | HEPA filter with activated carbon |
Software and Monitoring System
| Parameter | Value |
| Software | ideaMaker |
| File formats | STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS |
| Operating systems | Windows, macOS, Linux |
| Machine code format | GCODE |
| Connectivity | Wi-Fi, Ethernet, USB |
| Interfaces | USB 3.0, Ethernet |
| Wi-Fi protocols | WPA, WPA2, WPA3-PSK |
| Display | Touchscreen, 7 inches |
| Display resolution | 1024 × 600 |
| Main camera resolution | 1920 × 1080 |
| Nozzle camera resolution | 2592 × 1944 |
| Motion control processor | STM ARM Cortex-M7, 550 MHz |
| Logic processor | RK ARM Cortex-A55, 4 cores, 2 GHz |
| RAM | 2 GB |
| Built-in storage | 32 GB |
| Printer operating system | Debian |
| Electric door lock | Yes |
Dimensions and Operating Conditions
| Parameter | Value |
| Power supply | 200–240 V AC, 50/60 Hz, 230 V at 10 A |
| Operating ambient temperature | 15–30 °C |
| Operating relative humidity | 10–90 %, non-condensing |
| Storage temperature | From −25 to +55 °C |
| Net dimensions | 710 × 635 × 785 mm |
| Net weight | 75.9 kg |
| Gross dimensions | 880 × 772 × 1076 mm |
| Gross weight | 80 kg |
| Gross weight with pallet | 98.2 kg |
Buy the Raise3D T450 Large-Format 3D Printer
Buy the Raise3D T450 3D printer for producing large-sized prototypes, functional parts, housing elements and production tooling. The equipment is suitable for working with standard and engineering thermoplastics. Our specialists will help you choose the printer configuration and advise you on compatible materials, the technical capabilities of the equipment and delivery terms.
