Formlabs Surgical Guide Resin for Form 4, 1L

Buy Surgical Guide Resin for Form 4

Formlabs Surgical Guide Resin for Form 4 is a high-quality biocompatible resin. It is designed for printing surgical templates, drill prototype guides, and drill templates. The parts obtained during the printing process exceed dental requirements for the accuracy and quality of parts.

The innovative formula of the product allows for fast printing, which significantly increases the productivity of the process. The resin is designed for Form 4 printers. The product has been tested and confirmed to meet high disinfection standards. Finished products can be treated with disinfectants and sterilized in an autoclave for implant systems.

By choosing Formlabs Surgical Guide Resin for Form 4 for printing surgical instruments, you get a reliable and effective product with a high degree of biocompatibility.

Advantages of Surgical Guide Resin for Form 4

• High-quality modern material for printing surgical templates.
• The resin allows you to obtain transparent, stable templates.
• Finished products can withstand disinfection with special solutions and processing in a disinfection chamber.
• If you follow the printing technology, you are guaranteed to get a high result.
• Surgical Guide Resin has proven itself to be an optimal material for printing surgical implant templates.
• If you buy a Farm 4 3D printer, you can print forms and templates directly in the clinic. This is convenient and significantly increases productivity.

Scope of Surgical Guide Resin

• 3D printing of device size templates.
• Printing drilling templates.
• Printing occlusal caps.
• Printing splints.

Surgical Guide Resin Properties*

• Elongation – 12%
• Flexural Strength – > 102 MPa
• Flexural Modulus – > 2400 MPa

*Material properties may vary based on part geometry, print orientation, print settings and temperature. As-cured specimen data was measured on Type IV tensile specimens printed on a Form 2 printer using 100 µm Surgical Guide Resin settings, washed in Form Wash for 20 minutes in ≥99% isopropyl alcohol and cured at 60°C for 30 minutes in Form Cure.

Buy resin for surgical templates for Form 4 in Warsaw