Formlabs BioMed Durable Resin for Form 4, 5L

Buy 5L of Biomed Durable resin for printing biocompatible products

BioMed Durable Resin is designed to print transparent biocompatible parts of high strength. Finished products are resistant to impact, abrasion and cracking. The material has USP Class VI and can be used in products that are in contact with skin and mucous membranes for a long time (up to 30 days) (up to 30 hours). Contact with tissues, bones, and dentin is possible for up to 24 hours.

The product is certified according to ISO 13485 as biocompatible. USP Class VI certification allows it to be used in pharmaceuticals. If you buy a 3D printer for a clinic, modern innovative materials allow you to organize the printing of specific products needed by a specific patient, right on site. This improves the quality and reduces the time of operations, taking medical care to a new level.

Advantages of BioMed Durable Resin 5L

• Large resin capacity is convenient for printing large parts or large quantities of small items.
• Transparent items are highly durable, resistant to cracks, impacts, and abrasion.
• Biocompatible product (subject to full compliance with printing technology).
• BioMed Durable Resin is certified according to ISO 13485, USP Class VI.
• To use 5L of resin, a special pump is required to feed the resin into the reservoir.
• For smaller print volumes, it is better to purchase a Formlabs Biomed Durable Resin cartridge with a capacity of 1L for Form 4.

Where is BioMed Durable Resin biocompatible 3D printing material used?

• Medical disposable instruments.
• Components and end devices are impact-resistant and biocompatible.
• Special devices and instruments needed by patients.

Material Properties BioMed Durable Resin

• Ultimate Tensile Strength – 29.1 MPa
  
• Tensile Modulus 994 – MPa
• Elongation at Break – 33%
• Flexural Strength – 21 MPa
• Flexural Modulus – 643 MPa
• Hardness Shore – 75D
• Notched Izod – 98 J/m
• Heat Deflection Temp @ 0.45 – MPa 46ºC

Buy BioMed Durable Resin 5l for Form 4 in Poland