3D printer CreatBot D1000

Large industrial 3D printer CreatBot D1000

Introducing the CreatBot D1000 large industrial 3D printer - a new high-temperature 3D printer with a large print area of 1000×1000×1000 mm, which is an upgrade of the F1000 model.

Manufactured to the highest standards, this printer is the ideal machine for creating large full-size parts, prototypes, tools, molds, jigs and fixtures in the enterprise. You can have a fully functional, high-quality prototype within days. CreatBot's large filament rolls made of PLA, ABS, ASA, PA-CF, etc. are well suited for your large models without worrying about frequent filament spool replacement.

• The build size is 1000×1000×1000 mm.
• Two automatic lift extruders that print at 420 °C.
• High resolution and high speed 3D printing.
• Camera control technology.
• Fully enclosed housing.
• Reliable 24/7.

Large 3D print size

The CreatBot D1000 was designed to make industrial 3D printing of large objects and prototypes as easy as possible. It utilizes many advanced technologies for extra-large prints of impressive quality.

The CreatBot D1000 is your best choice if: 

• You are looking for an industrial large-scale 3D printer for prototypes and engineering-grade materials.
• If you're tired of the brittleness of PLA and the warpage of ABS, try our revolutionary UltraPA-CF material.

Print your large model with a large nozzle, in a few days you will receive a large-sized model with high strength of 80 MPa and temperature resistance of 150 °C. The best choice for validating your prototype.

Application

• Design prototyping.
• Functional prototyping.
• End-use parts.
• Spare parts.
• Molds and dies.

Twin extruders with automatic lift 420 °C

The D1000 is equipped with a new intelligent automatic lift-off twin extruder set with a print temperature of up to 420 °C. The hot part can be quickly replaced with another. The printer is capable of printing not only large PLA and water-soluble PVA materials for prototypes at the highest speeds, but also ABS, PC, Nylon, carbon fiber, flexible and higher performance engineering materials for direct applications. The dual-hotend is easy to maintain and available for replacement.

Failover and filament detection

The printer will automatically remember the current position and save 3D printing data and continue printing from the last time it was stopped after powering on. You won't notice any trace of stopping on your model. Also, the D1000 will prevent print failures by stopping the print and alerting you with a beep when the filament runs out.

Linear rails and servo motors

The D1000 precision linear rail is very thick and robust. It will not warp or lose accuracy after the millionth printhead stroke.

The servo motors respond quickly and accurately to changes, without inertia or lag. Closed-loop position control overcomes the problem of pitch loss. Heat and noise are significantly reduced. This gives the printed model ultra-high performance at high speed.

Hot chamber and filament drying compartment

Heating the print chamber to a temperature of 60 °C ensures high-quality 3D printing from high-quality materials. The fully enclosed chamber blocks all external factors such as temperature changes, dust, etc. Ensuring a constant temperature is important so that the model does not deform. The enclosure also reduces noise.

The filament drying compartment provides a chamber temperature of 45 °C and 65 °C for drying 2 spools weighing up to 5 kg each, such as PLA, Nylon, PC, ABS and other hygroscopic materials.

Automatic bed leveling

The CreatBot D1000 3D printer uses a high-precision 100-point servo encoder to maintain a predetermined level of platform flatness by intelligently compensating for the height of the Z-axis table during the printing process to achieve automatic leveling.

HEPA air filter

The air filter system can adsorb impurities and gases generated during the printing of specialty and engineering filaments such as ABS, nylon, PC. The environmental protection is sufficient for use at home, school or office.

Control with the built-in camera

APP-based camera control technology allows users to remotely control the parameters of the printing process: speed, pause, temperature, etc. This allows you to get the best 3D print quality in the shortest possible time without any glitches. This is a very useful feature for large models and long-term printing.

Stability

The all-steel body not only ensures vibration-free stability during printing, but also significantly extends the service life. The optimization and interaction of the overall structure ensure stable and efficient operation. The first batch of CreatBot 3D printers with an all-steel body has been in operation for 9 years and over 30,000 hours.

An affordable and reliable large 3D printer

The CreatBot D1000 was designed to make industrial 3D printing of large-scale objects and prototypes as easy as possible. It is an industrial 3D printer that meets market demands and features a new intelligent dual extruder kit, heated enclosed chamber, automatic alignment and chamber control for large, impressive prints. The camera control technology allows customers to control the printing process through an APP, which can produce the best print quality in the shortest time without disruption. With a fast-heating platform and hot chamber, this high-resolution, large-font workhorse delivers incredible results using high-quality materials. The CreatBot D1000 sets a new standard in additive manufacturing and expands the material capabilities of large-scale 3D printers, enabling more companies to significantly reduce costs and time.

Undoubtedly, the CreatBot D1000 is your best choice if you are looking for an industrial large-scale 3D printer for prototypes and engineering-grade materials.

Buy an industrial 3D printer in Poland