3D printer CreatBot PEEK-250

High-temperature 3D printer CreatBot PEEK-250

The new CreatBot PEEK-250 is a high-temperature 3D printer at a bargain price. The nozzle temperature is up to 480 °C, the temperature of the print chamber and table is up to 200 °C, and the temperature of the printed layer is up to 385 °C. The unique parameters of the desktop printer allow you to work with a wide range of materials. CreatBot PEEK-250 takes only 20 minutes to reach a temperature of 180 °C!

Engineered plastics and carbon fibers, fiberglass, high-temperature PEI and PEEK materials - the PEEK-250 is friendly to print materials and users. After 5 hours of operation at a chamber temperature of 180 °C, the outer surface temperature is only 40 °C.

This is not a fantasy, but a reality on your desk! The superior performance is achieved through a unique combination of thermal insulation and water cooling. The world's first desktop high-temperature 3D printer ready to print rugged, durable components.

Advantages and features of CreatBot PEEK-250

• High-temperature 3D printer with industrial specifications.
• Printing speed can vary from 55 mm/s to 200 mm/s.
• A wide range of materials is available for printing, including PEI plastics.
• Convenient operation and control thanks to a 7-inch full-color touch screen.
• Printing area: 250*250*300 mm.
• The device saves data when the power is turned off.
• Indication of the presence of filament and stop when there is none.
• All printer modules are resistant to high temperatures.
• The printing chamber heats up to 180°C in just 20 minutes.
• A special spoiler device provides hot air convection in the printing chamber at 360°.
• Temperature uniformity ensures ideal molding and crystallization of a model of any shape.
• The double-tooth extruder is made of silicon carbide, which ensures its strength and wear resistance in conditions of ultra-high temperatures.
• The PEEK-250 extruder can be used for printing with all filaments, including carbon fiber and fiberglass, at temperatures up to 500°C.
• The extruder nozzle is easy to replace without removing other parts and unscrewing screws.
• The high temperature inside the printer has almost no effect on the ambient temperature.
• Active air cooling of the 3D printer door.
• Excellent thermal insulation and water cooling make the device safe to operate in any conditions.
• The PEEK-250 3D printer has a firing mode immediately after printing, without a time delay, with different temperatures at different stages of processing.
• In a continuous process, the part is not torn off the platform after printing, so as not to create risks of asymmetric stress in the layers.
• Firing begins immediately after printing, which is technologically more desirable for achieving the best product parameters.
• Fine settings allow you to work with a large amount of material and get parts of perfect quality.
• Integration with Windowsall, macOS.
• Software Creatware, Simplify3D, Cura, Slic3r.
• The compact dimensions of the device do not require much space.
• Dimensions of CreatBot PEEK-250: 630x555x815 mm, weight 120 kg.

What is a high-temperature 3D printing for?

A printer with a high printing temperature is necessary for working with a large group of materials. As a rule, the higher the desired parameters of strength and wear resistance of the finished part, the higher the temperatures needed for its printing and post-processing.

If a temperature of 180 ° C is needed to anneal the printed part, then the technical characteristics of the CreatBot PEEK-250 guarantee the possibility of annealing immediately after printing! This is not just convenient, it's great! Time and energy are saved, the freshly printed part is not exposed to unnecessary mechanical stress.

The device's print head can withstand temperatures up to 500 degrees, the manufacturer states a maximum nozzle temperature of 480°C. This removes many restrictions when choosing a print material.

Print without limits

Thanks to the high temperature mode supported by the printer, the user has access to a wide range of materials. Engineering plastics: nylon, PETG, PVDF, carbon fiber, PLA, ABS, ASA, PC. High-temperature materials: PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU. High-performance filaments: PEI (ULTEM™Full line), PEEK, PEEK-CF (carbon fiber), PEEK-GF (glass fiber), PEKK, etc. CreatBot PEEK-250 can print anything, don’t limit the device and yourself: print and bake in one cycle!

Print chamber temperature 200 °C

To form a strong structure of polymer materials, such as PEI and PEEK, high temperature is simply necessary. But most 3D printers have a maximum temperature limit of 70-80 degrees. Do you know why? Because of the components - this is the maximum temperature of heat resistance of printer units and parts. Motors, belts, frames and other parts cannot withstand higher temperatures.

There is also a small portion of printers that are already high-temperature, where the maximum operating temperature of mechanisms and parts is 120 degrees.

A very small segment of high-temperature 3D printers have a maximum temperature of 150 degrees. These printers already have a complex design and require additional thermal insulation solutions.

Unique characteristics of CreatBot PEEK-250

In CreatBot PEEK-250, the temperature regime is increased to 180-200 degrees, which requires additional design improvements. The device uses aviation thermal insulation material. It can provide thermal insulation above and below the nozzle. Well-established circulation of air masses ensures uniform temperatures around the entire perimeter of the chamber.

After 5 hours of operation at a temperature of 180 degrees, the case from the outside warms up to only 40 degrees. This is an excellent indicator! The manufacturer is responsible for the safety of users, and the units and mechanisms of the printer are designed for long-term operation at high temperatures.

Thoughtful design, multi-path heat dissipation, custom-made heat-resistant parts, the use of multi-layer innovative materials - CraftBot PEEK-250 is the best 3D printer for printing high-temperature materials.

Innovative extruder

The extruder is the record holder in the galaxy of super-components. Its head can print with all materials up to 500 degrees, including fiberglass and carbon fiber. This was made possible by a durable material, silicon carbide. The material has high strength and wear resistance.

The extruder head takes the greatest loads in high-temperature printing mode. It is an integrated cast nozzle made of wear-resistant material. After the resource is exhausted, the nozzle can be quickly replaced.

An effective water cooling system of the printer ensures the correct operation of the device and its safety for the user.

High temperature is a guarantee of the quality of printed products

For materials that require high temperatures, the CraftBot PEEK-250 sets the printing temperature between 160 and 200 degrees. This ensures that the material is fully extruded and the layers are bonded. High temperature controls the internal stress of the part after formation. Excessive stress can cause cracking.

Dry the filament before printing

For high-quality printing with high-temperature materials, it is important that the filament is dry before printing (humidity less than 0.02%). These parameters are achieved in 4 hours of drying at 150 degrees. The filament compartment is equipped with heating, you just need to set the desired parameters and wait.

Aviation-grade printing platform

200°C, auto-calibration, polymer coating

The ultra-flat platform with a polymer coating has aviation-grade accuracy of parameters. Thanks to automatic alignment, errors in high-temperature conditions are excluded. The natural flatness of the platform is 0.05 mm, the high-temperature flatness is 0.05 mm, at 180 ° C the flatness is 0.01 mm.

Optimize the production of parts by combining printing and annealing

Do not waste time detaching the model from the platform, cooling and annealing in a special oven. CreatBot PEEK-250 has a "Direct annealing after printing" mode. If the material requires it, for example, PEEK or PEI. You can change the annealing temperature and time using the settings. This allows you to start annealing with one click.

If you choose the CreatBot PEEK-250 high-temperature printer, the production of plastic parts will become much easier, faster and cheaper. Optimize production with an innovative printer. The best technology - the best result!

Technical specifications

• Print volume 250*250*300 mm
• Filament diameter 1.75 mm
• Number of nozzles: 1 extruder
• Nozzle diameter 0.4 mm (0.3~1.0 mm optional)

Materials:

• Engineering plastics: PLA, ABS, ASA, PC, nylon, PETG, PVDF, carbon fiber;
• High-temperature material: PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU;
• Ultra-high performance material: PEI (ULTEM™Full line), PEEK, PEEK-CF (carbon fiber), PEEK-GF (glass fiber), PEKK, etc.

Printing speed:

• Best printing speed 55 mm/s
• Max. Printing speed 200 mm/s

Power supply:

• Input power: 200V~240V, 20A
• Rated power: 2500W

• Screen: 7-inch full-color touch screen, multi-language
• Printing method: USB connection/USB disk
• Mechanical parameters:
• Cooling: air cooling and water cooling
• Platform: PCB aluminum + PEEK circuit board
• Positioning accuracy: X Y axis 0.0127mm, Z axis 0.00125mm
• Extruder: direct drive
• Machine structure: fully enclosed hot chamber
• Temperature:
• Max. nozzle temperature 480 °C
• Chamber temperature 200 °C
• Max. Platform Temperature 200 °C
• Software: Creatware, Simplify3D, Cura, Slic3r
• Operating systems: Windowsall, macOS
• Print file type: STL, OBJ, AMF, Gcode

Special functions:

• Crash recovery
• Save data when power is off
• Pause printing when there is no filament
• Three-layer insulation + Active air cooling

Thermal insulation and cooling, features of parts:

• High-temperature resistant motors, linear guides, belts and chains to ensure long-term operation of high-temperature printing
• Three-layer insulation + active air cooling (chamber temperature reaches 180 °C, outer surface temperature less than 40 °C)
• Door cooling: active air cooling
• Size and weight: 630*555*815 mm, weight 120 kg

Buy high temperature 3D printer PEEK-250 in Poland