FIBERFLEX 30D filament Fiberlogy 1,75 mm / 0,85 kg

Elastic multi-colored plastic FiberFlex 30D for 3D printing

FiberFlex 30D filament Fiberlogy 1.75 mm / 0.85 kg is a flexible thread for printing plastic parts that are resistant to thermal and chemical influences with high abrasive resistance. Due to the indicated properties, the material is ideal for printing phone cases, watch straps, heart rate monitors and pedometers.

FiberFlex 30D can also be used for 3D printing of flexible connectors, toys, and their parts, jewelry. Bright saturated colors, resistance to bending of finished products: choose FiberFlex 30D - it will not let you down! Some printing experience is required to work with soft materials. The manufacturer recommends using a direct extruder and reducing the print speed. You can also reduce the pressure on the extruder.

Bright, modern material allows you to produce products for various needs where a bend-resistant, plastic material is needed. Properties of multi-colored plastic FiberFlex 30D

Soft, flexible material, resistant to bending.

• Available in different colors.
• The material is resistant to thermal and chemical influences.
• Suitable for printing finished products and parts.
• The material hardness is 30D on the Shore scale.
• At low temperatures, the material has high impact strength.

FibreFlex 30D application area

• Jewelry: bracelets, bright headbands.
• Toy parts or finished plastic figures.
• Flexible hinges and other connecting elements.
• Gadgets and spare parts for them.
• Rubber machine parts subject to bending, such as seals, hinges.

Recommendations for setting up a 3D printer for printing FiberFlex 30D

General parameters need to be adjusted depending on the printer and printing conditions

• Table temperature: 50-70°C
• Closed chamber is not required
• Air supply: 50-75%
• Material consumption: 105-110%
• Print speed: < 35 mm/s
• Table covering: glass, masking tape
• Direct outlet: yes, 1-2 mm
• Retraction speed: 10-30 mm/s
• Drying conditions: 60°C / 4 hours

Tip: to make it easier to remove the print, you can heat the table to 110°C.

Raise3D Open Filament Program (OFP)

Buy FiberFlex 30D 3D plastic in Poland

In the Center 3D Print store you will find a wide range of filaments for 3D printing on FDM/FFF 3D printers. Feel free to contact our specialists for advice if you need help choosing the right material for high-quality 3D printing of specific applications.