FIBERFLEX 30D filament Fiberlogy 1,75 mm / 0,5 kg

Durable and flexible plastic for 3D printing Fiberflex 30D Fiberlogy

Fiberflex 30D filament Fiberlogy is ideal for printing connecting elements and other objects that require frequent bending. The filament hardness according to Shore is 30D. Finished parts made of filament are not hard, but they tolerate constant deformation and mechanical impacts well.

The material is soft, so working with it requires experience and beginners should practice on harder filaments, for example, FiberFlex 40D. To optimize the printing process, the manufacturer recommends reducing the print speed and using a direct extruder.

It is also advisable to reduce the pressure on the extruder. Elastic plastic with a hardness of 30D is characterized by high impact strength even at low temperatures.

The material has high abrasive and thermal resistance.

What 3D printing is Fiberflex 30D used for?

The material can be used wherever it is necessary to obtain a flexible object or part that is subject to constant mechanical impact. Fiberflex 30D is used to print:

• Jewelry and accessories: bracelets, headbands, pendants.
• Parts or whole toys: figures of people and animals, tires for cars
• Connecting elements: flexible loops, fittings.
• Gadgets or accessories for them: pedometers, heart rate monitors, watch straps, phone cases.
• Rubber parts of cars: seals, spare parts subject to constant bending.

FiberFlex 30D properties:

• Excellent thermal, chemical and abrasive resistance.
• High impact strength (including at low temperatures).
• The material hardness on the Shore scale is 30D.

How to set up a 3D printer to print FiberFlex 30D?

The parameters below are only the recommended print settings for this material. To ensure the best print quality, select the settings that are suitable for your specific printer and printing conditions.

• Print temperature: 200-220°C.
  
• Bed temperature: 50-70°C.
  
• Closed chamber: not required.
  
• Airflow: 50-75%.
  
• Flow rate: 105-110%.
  
• Print speed: < 35 mm/s.
  
• Print surface: glass substrate, masking tape.
  
• Forward retraction: yes, 1-2 mm.
  
• Retraction speed: 10-30 mm/s.
  
• Drying conditions: 60°C/4 hours.
  

Note: for easy removal of the print, you can heat the bed to 110°C.

Raise3D Open Filament Program (OFP)

Buy FiberFlex 30D 3D plastic in Poland

In the Center 3D Print store you will find a wide range of filaments for 3D printing on FDM/FFF 3D printers. Feel free to contact our specialists for advice if you need help choosing the right material for high-quality 3D printing of specific applications.