Magigoo Pro Kit - glues for 3D printing

Buy Magigoo Pro Kit glue for 3D printing

The Magigoo Pro Kit of 3D printing adhesives contains 4 bottles of adhesive solutions for different purposes. On this page, you can buy a 3D printing adhesive from the Magigoo Pro series to get a solution for excellent printing results with any filament.

Magigoo Pro adhesives are designed for professional use and are intended for use with engineering filaments only. These professional-grade adhesives ensure that prints adhere firmly when the work surface is hot and that the printed part is easily removed when it cools down, and that adhesive residue should also be easily cleaned.

• Magigoo Pro PA is for professional use, for use exclusively with polyamide filaments. Designed and tested to work with various brands of PA (nylon) and fiber-reinforced filament.
• Magigoo Pro PC - for use exclusively with polycarbonate and fiber-reinforced threads.
• Magigoo Pro PP - for use exclusively with polypropylene threads.
• Magigoo Original is designed to work with various types of threads, including most types of PLA, ABS, HIPS, PETG, TPU threads.

How to use

• Shake the bottle.
• Apply to the desired area by pressing the tip onto the bed (activating the internal valve) and spreading as needed.
• Print according to the recommendations of your ribbon/printer manufacturer.
• Allow to cool and remove. The print should appear immediately.
• Use a damp cloth (with water) for cleaning.

Safety precautions

These products are intended for professional use. Read the instructions carefully before use.

Using this product with other types of filaments may cause excessive adhesion and damage the surface of the build.

IMPORTANT: Some products may contain corrosive and irritating substances to the eyes. Wash your hands after use. Ideally, wear rubber gloves. Read safety data sheets or consult the manufacturer if necessary.

The bottle applicator has a spring-loaded valve inside. To activate it, press the nib firmly against the work plate. When pressing on the bottle walls, make sure the applicator does not pop out.

Tips for 3D printing

For larger prints, we recommend using a 20 mm edge.

In case of excessive adhesion, it is recommended to moisten the print layer with a little water, slowly wiping it under the part, which should make it easier to remove the part.

Tested materials

Database of tested materials:

View all tested 3D printing filaments and related Magigoo products and learn more about optimized print settings.

Magigoo Manual:

More than 5 years of research by the Magigoo team in one 114-page guide. Learn how to get the most out of the MAGIGOO® adhesive range.

Disclaimer:

Since all 3D printers and print environments are different, the data in this table should only be used as a guide for optimal printing settings on your machine. For best printing results, you may need to further refine your print settings. Thought3D Ltd / Magigoo is not responsible for any errors that may occur.

Buy a set of glues for a 3D printer in Poland