- Stock: In Stock
- Model: Fast Model
- Weight Brutto: 6.50kg
- SKU: RS-RPS-FMGR-01
More from this brand
Formlabs Fast Model Resin for Form 4: Fast Printing, Good Detail
Formlabs Fast Model material is actively used in dentistry, for printing large parts in a short time, design iterations of products, for 3D printing of forms and prototypes. Thanks to the high printing speed, you can significantly increase productivity without losing quality.
Print small high-quality models in just a few minutes! Rapid prototyping, fast printing of finished products – Formlabs Fast Model resin will take your productivity to a new level!
A pleasant addition to fast printing will be an extremely low odor level: the concentration of volatile organic compounds in the resin is very low. Therefore, even large printing batches can be carried out comfortably.
The appearance of finished products is ready for presentation immediately after a short post-processing. 5 minutes of washing and the same time of polymerization at room temperature.
Features of Formlabs Fast Model resin 5l
- The volume of 5 liters is suitable for printing large products and large batches. For smaller-scale work, it would be better to buy a Fast Model 1L cartridge.
- The material allows you to quickly print even large parts (2 hours), small items are printed in a few minutes.
- Finished products have a very pleasant matte gray color.
- The material is used in dentistry for the production of primary forms, to obtain information about further fitting.
- Low concentration of volatile organic compounds minimizes unpleasant odor.
- Finished products require minimal post-processing. It takes 5 minutes to rinse and 5 minutes to polymerize at room temperature.
- A resin pump is required to operate a 5L container.
Where Formlabs Fast Model resin is used
- In dentistry for printing primary forms, for further clarification of sensations.
- Variants of designer products at the stage of work on them.
- Large models and parts that need to be quickly manufactured.
- 3D printing of initial forms and prototypes.
What's new in Fast Model Resin?
Fast Model Resin is the next generation of Draft Resin, designed to utilize the new Form 4 ecosystem. Compared to Draft Resin V2, Fast Model Resin:
- Faster is formulated to take advantage of the new Form 4 ecosystem to print three times faster.
- Stronger and stiffer – 45% higher strength and modulus.
- More opaque and matte color.
Fast Model Resin mechanical properties
| Post-cured at room temperature for 5 minutes | Post-cured at 60 °C for 15 minutes | |
| Ultimate Tensile Strength | 55 MPa | 62 MPa |
| Tensile Modulus | 2500 MPa | 2700 MPa |
| Elongation at Break | 15% | 11% |
| Flexural Strength | 98 MPa | 106 MPa |
| Flexural Modulus | 2600 MPa | 2700 MPa |
| Notched Izod | 30 J/m | 37 J/m |
| Heat Deflection Temperature at 0.45 MPa | 58 °C | 76 °C |
Buy Fast Model Resin 5L for Form 4 in Poland
See the Data Sheets of the Formlabs Fast Model Resin on "Download Data Sheets" tab
