Formlabs Durable Resin for Form 4, 5L

Durable Resin: Printing Low-Friction Products

Formlabs Durable Resin 5 l is a sufficient volume for industrial use or printing a large batch of products. American-made 3D printing resin allows you to obtain products with excellent mechanical properties.

The resin Formlabs Durable is designed and recommended for use in the manufacture of parts subject to constant compression and contact with other surfaces. Due to the low coefficient of friction, product wear is minimal. The strength and rigidity of parts printed from resin is similar to polyethylene.

The material is suitable for printing compressible parts and prototypes, fixtures and parts subject to constant mechanical stress. Durable material, flexible and resistant. For printing small parts or small batches of products, the manufacturer offers a 1l packaging option.

Features of Formlabs Durable Resin

• The 5 l packaging is suitable for printing large parts or large batches of products.
• High-quality American-made 3D printing resin.
• Suitable for printing parts and prototypes subject to compression.
• The smooth surface of finished products has a low coefficient of friction and is resistant to wear.
• Products printed with resin are highly resistant to deformation.
• The material resembles regular plastic in appearance.
• Suitable for printing prototypes with high impact resistance.
• The material properties are close to those of polyethylene.

Material Properties* Durable Resin

• Ultimate Tensile Strength – 28 MPa
• Tensile Modulus – 1.0 GPa
• Elongation – 55%
• Flexural Modulus – 0.66 GPa
• Notched Izod – 114 J/m
• Heat Deflection Temp @ 0.45 MPa – < 41 ºC

* Material properties may vary based on part geometry, print orientation, print settings, and temperature. Data was obtained from parts printed using Form 2, 100 μm, Durable settings and post-cured with a Form Cure for 120 minutes at 60 °C.

Buy Formlabs Durable Resin 5l for the Form 4 in Poland