Menu
Your Cart

Formlabs Fuse Sift for Fuse 1 3D printer

Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
Formlabs Fuse Sift for Fuse 1 3D printer
  • Stock: In Stock
  • SKU: FS1-SIFT-230V
53 100 zł
Ex Tax: 43 171 zł

Available Options

Fuse Sift for SLS 3D Printer Fuse 1

Formlabs Fuse Sift is an efficient part extraction and SLS powder recovery, storage and mixing system for Fuse 1 3D printer. This easy-to-use station creates a safe workflow for extracting prints and sifting, storing, dosing and mixing SLS powder. All this in one device - the maximum functionality available in the SLS market.

  • Part extraction
  • Powder recovery
  • Powder storage and Mixing


How Fuse Sift works

  • The negative air pressure system keeps the powder inside while still providing open access and easy cleaning. Fine powder remains incide the working chamber and will not get into the working room. Open access under the hood and easy parts cleaning with the built-in vacuum hose.
  • Low waste. 30% material refresh rate - you can print with up to 70% recycled powder. The Fuse Sift filters out particles to be remixed with new powder and reused in future prints.
  • Automatic Powder Mixing. Fuse Sift automatically doses and mixes used and new powder so you can reduce waste and control powder flow.
  • Continuous SLS printing. By transferring modular Build Chambers and Powder Cartridges between Fuse 1 and Fuse Sift, create a continuous cyclical SLS printing process.
  • Complete Toolbox. Fuse Sift includes a complete set of finishing tools. They will help to easily remove excess powder from printed parts.


Formlabs Fuse Sift for Fuse 1 recovery and mixing SLS powder


Formlabs Fuse Sift from the official distributor in Poland

Formlabs Authorized Partner in Poland

Center 3D Print is a Formlabs Authorized Partner in Poland.

Here You can buy any Formlabs SLS 3D printers with an official manufacturer's warranty. When you buy Formlabs printers at Center 3D Print, you get training, equipment installation, and service. Contact us in advice.



Buy SLS Powder Recovery Station for Fuse 1


Printer Options
Printing Technology SLS
Build Field (mm) 165×165×300
Material Parameters
Material Refresh Rate 30 - 50%
Build Chamber Modular, compatible with Fuse 1 and Fuse Sift
Hopper Capacity (L) Fresh Powder: 8.5 kg Nylon 12, Used Powder: 9.1 kg Nylon 12
Supported Materials Powder
Running Noise, dB Does not exceed 76.5 dB(A)
Air Filter Replaceable HEPA medium
Other Included Accessories: Large Brush, Small Brush x 2, Pipe Cleaners, Dental Picks, Gloves, Dust Mask, Safety Glasses, Vacuum Brush Tool, Vacuum Crevice Tool, Lifting Straps
Control Interactive touchscreen, physical buttons
Printer Compatibility Fuse 1, Fuse 1+ 30W
Connectivity Wi-Fi (2.4 GHz), Ethernet (1000 Mbit), USB 2.0
Power Input With a vacuum that draws less than 6 A (230 VAC) /12 A (120 VAC) - 230 VAC, 7.5 A (dedicated circuit) With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC)) - 230 VAC, 10 A (dedicated circuit)
Air Handling Negatively pressurized hood with replaceable HEPA filter Independent venting system
Vacuum Requirements Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)
Build Chamber Dimensions (mm) 279×342×489
Build Chamber Weight (kg) 11
Manufacturer Country USA
Warranty Period (months) 12
Weight & Dimensions
Weight Netto (kg) 93
Dimensions Netto (mm) 1015×610×1545, Height when open: 1900
Minimum Access Dimensions (mm) 2211×1220×2180
Environment Parameters
Operating Temperature Range (°C) 18 - 26
Operating Humidity Range (%) Up to 30

Fuse Series Complete Service Plan Benefits

The Fuse Series Complete Service Plan is designed for maximum peace of mind with private remote training to get you started, direct phone and email support, as well as preventative checkups to keep you printing, and rapid repairs by Certified SLS Experts to resolve any major issues.


CoverageEach Plan includes support for one Fuse Series printer and Fuse Sift
WarrantyOne, two, three or five years
Printer/Component Replacement
Direct Phone Supoport Mon - Fri, 9 am - 6 pm ET and CET. Multilingual support in English, German, Italian, French and Spanish.
Annual Preventable Checkups An annual onsite visit from a trained expert to perform routine maintanance.
Training Customized remote training
Onsite Repairs Within five business days
Fleet Pricing Discounts available for co-located printers


Eliminate the Unexpected

Maximize your return, protect your investment, and eliminate unexpected costs with our service plan for Fuse Series SLS 3D printers and the Fuse Sift.


Worry-free warranty coverage and repairs

Our team will work with you to quickly resolve any issues through remote support, including shipping replacement parts free of charge. If we determine that an onsite visit is necessary, Formlabs or your certified local partner will send a Certified SLS Expert to your facility at no extra charge.


Up to five years of coverage for your entire fleet

The Fuse Series Complete Service Plan offers one, two, three, or five years of support that can be renewed at your discretion. Purchase more years upfront for additional savings.


Direct phone and email support

You’ll have phone and email access to Certified SLS Experts during business hours.


Annual preventative checkups

Get an annual onsite visit from a trained expert to perform routine maintenance so you can stay focused on running your business.


Private remote training

Join a private remote training session with a Certified SLS Expert to make sure your team gets up and running smoothly.


Onsite training available to purchase

Get to know your printer and post-processing on your home turf with a customized training session defined by your needs, enabling you and your team to become SLS experts in no time.


Terms and conditions apply. Please see the Formlabs Fuse Series Service Plan Terms of Service for more information.



Write a review

Please login or register to review

Videos





Cookies
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy