Ortur Smoke Purifier 1.0 for Laser Engravers

Air purifier for Ortur 1.0 laser engravers

The Ortur air purifier is useful for anyone involved in laser engraving. If engraving is done indoors on a regular basis, then filtration is an industrial necessity.

Ortur Smoke Purifier 1.0 (model LW‑6151) is a professional device for effective removal of smoke and harmful particles when working with laser engravers. It is designed for use with Ortur devices (e.g. LM 3), and is also compatible with most desktop laser engravers.

Key features of the Ortur Smoke Purifier LW‑6151

• Power: 150 W, voltage ~220 V/50 Hz.
• Airflow performance: 258 m³/h — ensures quick smoke removal in the work area.
• Filtration efficiency: a three-layer filter traps particles as small as 0.3 μm with an efficiency of up to 99.97%.
• Noise level: ≤ 50 dB — for work in a comfortable, quiet environment.
• Duct connection: inlet interface Ø 55 mm; flexible pipe 1.2 m long (optional — on request).
• Weight and dimensions: about 9.5 kg; dimensions 300 × 242 × 343 mm.

How the Ortur filtration system works

The filtration unit consists of three layers: fibrous material, PP cotton, fiberglass, and activated carbon. This configuration reliably traps smoke and harmful gases when cutting or engraving various materials (wood, acrylic, leather, etc.).

The front cover opens with a single press — cartridge replacement takes seconds, requires no tools, and minimizes maintenance time.

Design and operational advantages

The 360° rotating pipe, made of fire-resistant material, ensures a tight seal and reliable fixation — eliminating smoke leakage even during intensive operation.

Heat dissipation is implemented with minimal power consumption and without overheating — the device operates stably, for a long time, and safely.

Advantages of using the Ortur 1.0 smoke purifier

• Maximum air purification efficiency: trapping particles down to 0.3 µm with 99.97% accuracy is especially important when working with plastics and varnishes that form a finely dispersed and harmful mixture.
• Fast room cleaning: thanks to the performance of 258 m³/h, the smoke was gone within a few minutes, especially when combined with a closed housing/enclosure.
• Quiet operation: a noise level of less than 50 dB allows you to work without distracting sounds, ideal for laboratory or educational environments.
• Versatility and reliability: suitable for both the Ortur LM 3 and other similar engravers; insulation and fire-resistant materials increase operational safety.

Packaging features and completeness of the Ortur Smoke Purifier 1.0 (LW‑6151)

• Standard kit: purifier body, filter module, inlet port, pipe connector, 1.2 m duct, power cable.
• Additional accessories: additional filters and pipes of other sizes can be purchased on request.

Recommendations for using the filter for laser engravers

1. Use in conjunction with an enclosure or exhaust hood, especially during prolonged cutting or engraving — this maximizes the system's efficiency.
2. Plan and perform regular replacement of filter cartridges during intensive use to maintain the stated air purification.
3. For a perfect hermetic seal during installation, it is important to choose a pipe of the appropriate diameter — usually 55 mm, but it can be adjusted to individual conditions.

The Ortur Smoke Purifier 1.0 is a high-performance, technically well-thought-out, and safe choice for professional operation of laser engravers. Three-stage filtration with 99.97% efficiency and an airflow of 258 m³/h create reliable protection against smoke, and the quiet, stable, and easy-to-maintain design makes it a convenient solution for any workspace. Our highly qualified managers will help you choose a laser engraver and the necessary equipment for it — call us!

Video review of the smoke purifier Ortur 1.0