-550x550.jpg)






-550x550.jpg)




-80x80.jpg)






-80x80.jpg)




- Stock: In Stock
More from this brand
CreatBot D600 Pro 3D printer
CreatBot D600 Pro 3D printer thanks to the print volume of 600 x 600 x 600 mm, the heated platform and high temperature of nozzles (420degrees Celsius) you can print large products with the best quality.
Using the CreatBot D600 Pro 3D nozzle with a diameter of 0.4 mm and 3D plastic with a thread diameter of 3 mm You can print objects with a smooth surface at higher speeds.
Perfect for use in industry, education and design.
Features of the CreatBot D600 Pro 3D printer:
- use of plastic with a diameter of 1.75 mm;
- presence of 2 nozzles;
- metal chassis;
- large print volume 600 x 600 x 600 mm;
- ultra-high temperature extruder (420 Celsius);
- translucent camera;
- ease of cleaning removable panels;
- Feeder gear motors installed;
- the presence of a ceramic heating platform (100 Celsius);
- presence of a metal tray of a heating platform;
- direct supply of plastic;
- camera heating;
- auto platform calibration;
- plastic drying chamber.
3D CreatBot D600 Pro printer to buy Warsaw
This printer has a huge printing area of 600 x 600 x 600 mm and the highest printing speed on the market for 3D printers. This 3D printer is equipped with the CoreXY system, which provides stability and printing accuracy of 0.05 mm, which means high quality 3D printing. The CoreXY system allows you to print at a speed of 120 mm/s.
The CreatBot D600 Pro 3D printer is equipped with a heated platform made of tempered glass, as well as extruders that can print at a temperature of 350 degrees. These characteristics allow you to diversify the materials used for 3D printing. Perfect for ABS, PLA, PVA, HIPS, wood, nylon, PETG, Rubber, Flexible, Copper, Bronze, Primalloy and others.
The 3D printer has a strong metal case. This allows you to print at high temperatures and at high speeds. The semi-closed camera allows you to monitor the printing process.
Due to the fact that the stepper motors are located in the back of the printer, the print head is lighter and provides high speed.
In addition to being able to print at high speeds and large objects, the CreatBot D600 Pro 3D printer is also capable of printing objects with a high level of detail and high resolution.
Extruders have interchangeable nozzles available in 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm for high detail and high speed printing. You can print large prototypes with high strength at high speeds, or small thin objects with high detail. The large CreatBot D600 Pro 3D printer can print with large nozzles up to 1.2 mm in diameter. This allows the layer to be printed thicker and wider for a stronger bond between the layers. As a result, the printing time of the object is significantly reduced.
The large 3D printer CreatBot D600 Pro is equipped with an intelligent sensor that detects the presence of thread. If the thread runs out or breaks, the printer pauses and waits for you to insert the thread, and then resumes printing where it was interrupted.
Modular power management supports automatic shutdown of the printer after printing.
The multifunction display shows information about the status of the 3D printer and allows you to make adjustments to the printer. You can easily change the print temperature, print speed, flow rate and fan speed, pause, pause or resume printing.
Controls allow you to make adjustments while you type.
Main page
FDM printer options | |
Printing technology | FDM |
Minimum layer height (micron) | 50 |
Build Field (mm) | 600*600*600 |
Ø of plastic (mm) | 3 (1,75 optional) |
Print temperature (°C) | Above 270 |
Number of extruders | 2 |
Chamber type | Closed |
Heating the chamber | Yes |
Plastic drying | Yes |
Autocalibration | Yes |
Feeder type | Direct |
Other options | |
Nozzle Diameter (mm) | 0,4 (optional 0,3; 0,5; 0,6; 0,8; 1,0) |
Positioning accuracy (µm) | ХY: 5,08; Z: 1,25 |
Printing accuracy (µm) | 50 |
Print speed (mm/s) | From 45 to 120 |
Maximum carriage speed (mm/s) | 200 |
Maximum nozzle temperature (°C) | 420 |
Maximum chamber temperature (°C) | 70 |
Drying thread temperature (°C) | 65 |
Heating the platform | Yes |
Maximum platform temperature (°C) | 100 |
Stepper Motors | 1.8° Step Angle with 1/16 Micro-stepping |
Platform material | Borosilicate glass bed |
Supported Materials | PLA, ABS, PLA+, ABS+, ASA, HPLA, Elastan, Plastan, Primalloy, Flex, TPU, TPE, PMMA, PET, POM, PEEK, PA (Nylon), PA6, Conductive ABS, Flame Retardant, Marble White PLA, Ceramic, Aluminium, Copper, Bronze, Brass and Gold PLA filaments, Wood, Carbon Fiber, PC, PETG, HIPS, PP, PVA |
Operating system | Windows (7,8,10), Mac OS X |
CPU | ATmega 2560 |
Printer control | 4.3″ Multilingual Touch Screen |
Assembly type | Supplied assembled |
Body material | Power-Coated Steel, Aluminum Casting for Motion Components, POM |
Features | Save data when power is off; Pause printing when filament run out; Turn off the power automatically when printing is complete |
Supported file types | STL, OBJ, AMF, GCO, GCODE |
Software | CreatWare, Simplify 3D, Cura, Slic3r, etc |
Connectivity | SD, USB |
Power supply | 100~240V, 50~60Hz, 4900W |
Manufacturer country | China |
Warranty period (months) | 12 |
Device parameters | |
Weight Netto (kg) | 125 |
Dimensions Assembled (mm) | 915*845*1085 |
Weight Brutto (kg) | 165 |
Dimensions Brutto (mm) | 940*1010*1320 |
Suggested Operating Environment | |
Operating Temperature Range (°C) | 15 - 32 |