Your Cart

PLA Stone Age filament Spectrum Filaments 1,75 mm / 0,5 kg

Spectrum PLA Stone Age

Spectrum PLA Stone Age plastic is based on PLA material with additives to mimic the "stone" structure of printed products. PLA Stone Age thread is made in two shades: Light Stone Age and Dark Stone Age. By adding impurities, the effect of masking the layers is achieved, and the surface of the printed products looks rough, reminiscent of real stone.

The original properties of the fibers of the Spectrum PLA Stone Age series determine their application in areas related mainly to decorative arts and architecture. Spectrum PLA Stone Age is used to make models with a unique stone look. It was used to create dozens of models of objects that already exist, as well as to visualize the objects that will be built.

Tip: impurities do not greatly affect the properties of printed products. An important aspect is the use of printing nozzles with a diameter of 0.4 mm and more.

PLA Stone Age characteristics

  • Beautiful, aesthetic imitation of stone.
  • Rough surface.
  • High durability.
  • Shrinkage-free printing.
  • Layer masking.
  • Not abrasive.


  • Decorative art.
  • Architecture.
  • Mock-ups.
  • Concept and demo prototyping of designed finished and semi-finished products.
  • Interior design.

PLA Stone Age Buy plastic with the effect of stone for 3D printing

PLA Stone Age Packaging

The thread weighing 0.5 kg is wound on a spool, which contains information about the type of material, diameter, color and recommended printing temperature. Each coil is packed in a vacuum with a dehumidifier. All in the original Spectrum Filaments foil cardboard.

Coil dimensions

  • Outer diameter - 200 mm.
  • Width - 55 mm.
  • Inner diameter - 52 mm.
  • Weight of empty coil - ± 220 g.

Verify quality of 3D plastic thread 

Spectrum Filaments is the only company in Poland and one of the few in the world that has a tool for testing purchased filaments. VERIFY YOUR SPOOL is the most accurate quality control system on the market, ensuring that Spectrum Filaments products meet his stringent requirements.

Filament for 3D printers is produced by free extrusion, which is one of the most difficult extrusion processing technologies, due to the particularly significant influence of process parameters on product dimensions and material homogenization. During the manufacturing process, each 1mm of Spectrum Filaments is continuously measured in 2 axes with an accuracy of ±0.8 µm, resulting in a quality end product. To prove this, Spectrum Filaments, as one of the few manufacturers in the world, has introduced the possibility of an online presentation, individually for each coil produced:

  • diameter travel along the entire length of the coil;
  • average diameter;
  • ovality;
  • standard deviation.

Buy 3D plastic with effect of a stone in Europe

FDM materials
Ø of plastic (mm) 1,75
Print temperature (°C) Up to 270
Material PLA
Diameter Tolerance (mm) +/- 0,05
Density (g/cm3) 1,24
Shrinkage (%) 0
Colours Stone Age Dark, Stone Age Light
Printing options
Print temperature (°C) 185 - 225
Bed temperature (°C) 0 - 45
Heated bed Necessary
Closed chamber Not required
Active cooling fan (%) Up to 100
Flowrate (%) 100 - 105
Print speed (mm/s) 40 - 80
Retraction - direct (mm) 1 - 3
Retraction - bowden (mm) 4 - 6
Retraction speed (mm/s) 25 - 45
Weight Netto (kg) 0,5
Weight Brutto (kg) 0,8
Manufacturer country Poland

Write a review

Please login or register to review
Ladies and Gentlemen, from May 25, 2018, Regulation (EU) 2016/679 of the European Parliament and of the Council of April 27, 2016 in short GDPR applies. In accordance with the Regulation, we need your consent to process personal data stored in cookies. More details in the Privacy Policy and the Cookies Policy. I consent to the storage of the so-called cookies on the device I use and for the processing of my personal data remaining when using the websites and other parameters stored in cookies. If you do not agree, please leave this page.