Your Cart

PLA Glitter filament Spectrum Filaments 1,75 mm / 1,0 kg

PLA Glitter 1.0 kg for 3D printing

PLA Glitter 1.0 kg is a highly aesthetic material from Spectrum Filaments based on PLA. It contains shiny particles in its composition, so products made from it have a beautiful gloss effect. The material itself due to this acquires greater hardness, and printed products - greater resistance to compression. These properties are improved due to the higher fragility of the products. It is possible to adjust the degree of gloss by increasing/decreasing the wall thickness.

The material has all the advantages of PLA plastic, while offering a more attractive surface finish on printed products.

Material characteristics

  • High gloss surfaces with reduced visibility of layers on the side of printed products.
  • Improved hardness and compressive strength compared to pure PLA.
  • Friendly interface.
  • Not abrasive.
  • Easy to print.
  • No shrinkage after cooling.


The properties of Spectrum PLA Glitter determine its use in industries related to the production of advertising materials or interior design elements, and wherever it is important to effectively present an object.

  • Interior items.
  • Promotional materials.
  • Educational projects.
  • Any area where it is important to present specific geometric shapes in an attractive way.

3D printing with PLA Glitter

Due to the presence of infusible particles, use print nozzles with a diameter of 0.4 mm or more.

PLA Glitter 1.0 kg filament  for 3D printing buy in Poland

Packaging PLA Glitter 1.0 kg

The filament is wound on a transparent spool, which contains information about the type of material, diameter, color and recommended printing temperature. Each coil is vacuum packed with desiccant. All in original Spectrum Filaments foil cardboard.

Checking quality of the 3D plastic thread

Spectrum Filaments is the only company in Poland and one of the few in the world that has a tool for testing purchased filaments. VERIFY YOUR SPOOL is the most accurate quality control system on the market, ensuring that Spectrum Filaments products meet his stringent requirements.

Filament for 3D printers is produced by free extrusion, which is one of the most difficult extrusion processing technologies, due to the particularly significant influence of process parameters on product dimensions and material homogenization. During the manufacturing process, each 1mm of Spectrum Filaments is continuously measured in 2 axes with an accuracy of ±0.8 µm, resulting in a quality end product. To prove this, Spectrum Filaments, as one of the few manufacturers in the world, has introduced the possibility of an online presentation, individually for each coil produced:

  • diameter travel along the entire length of the coil;
  • average diameter;
  • ovality;
  • standard deviation.

Dimensions of the spool

  • Outer diameter - 200 mm.
  • Width - 67 mm.
  • Inner diameter - 52 mm.
  • Empty spool weight - ± 250 g.

Buy plastic PLA Glitter 1.0 kg in Poland

FDM materials
Ø Of Plastic (mm) 1,75
Print Temperature (°C) Up to 270
Material PLA
Diameter Tolerance (mm) +/- 0,05
Density (g/cm3) 1,24
Shrinkage (%) 0
Colours Aurora Gold, Aztec Gold, Clear Gold, Emerald Green, Red Sparkle, Silver Metalic, Stardust Blue, Volcano Grey
Printing Options
Print Temperature (°C) 185 - 215
Bed Temperature (°C) 0 - 45
Heated Bed Necessary
Closed Chamber Not required
Active Cooling Fan (%) Up to 100
Flowrate (%) 100 - 105
Print Speed (mm/s) 40 - 70
Retraction - Direct (mm) 1 - 3
Retraction - Bowden (mm) 4 - 6
Retraction Speed (mm/s) 25 - 45
Manufacturer Country Poland
Weight & Dimensions
Plastic Weight (kg) 1,0
Weight Brutto (kg) 1,4

Write a review

Please login or register to review
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy