- Stock: In Stock
- SKU: RS-F2-FL80-01
Formlabs Flexible 80A Resin cartridge buy in Poland
Formlabs Flexible 80A Resin is an universal photopolymer flexible resin for 3D printer Formlabs Form 2, Form 3, Form 3B. From it you can create flexible and elastic products with a high degree of detail. Suitable for high-precision 3D printing and the manufacture of miniature products with a layer height of 50 or 100 microns.
This material is well suited for cushioning, damping and shock absorption, and can be used for products such as handles, pads, anatomy of cartilage and ligaments, seals, gaskets, etc.
Formlabs Flexible 80A Resin is a redesigned Flexible Resin polymer formula with improved mechanical properties and a new look. Next-generation material for high-quality 3D printing of flexible and elastic products with a high degree of detail.
Flexible 80A Resin is the strongest of the soft materials in the line of flexible and elastic resins from Formlabs with Shore 80A Shore Hardness, which mimics the flexibility of rubber or TPU. Due to the balance of softness and strength, 80A Resin withstands multiple cycles of bending and compression.
The designation "80A" in the name of the material reproduces the Shore hardness. If you need a stronger flexible polymer, use Elastic 50A Resin.
Flexible 80A Resin excellent mechanical properties
- Withstands repeated use without cracking. Tensile strength increased by more than 100%, the number of bending cycles - at least one order.
- Withstands bending and compression. Increased tensile strength, 1.5 times more elongation and reduced residual deformation during compression.
- Easier to use. Improved printability, 3 times smaller points of contact with supporting structures and reduced curing time by 2 times.
- New pure color. The new transparent color provides visibility of internal channels and a choice from a wide range of color options when painting the model.
Ideal for creating prototypes of consumer goods, flexible elements of robotics, medical devices, anatomical prostheses, film and theater props.
Formlabs engineering polymers are able to withstand a wide range of tests and work under loads. Now it is even easier to make flexible silicone, urethane and rubber parts on site in a few hours, using flexible and elastic resins Formlabs Flexible and Elastic.
Formlabs Flexible 80A hardware compatibility
- Very suitable for printing on 3D printers such as Form 3, Form 3B, Form 2.
- Supports print resolution: 100 and 50 microns.
- Final polymerization is required.
- Compatible with all Form 3/3B polymer tanks.
- The tank for polymers the Resin Tank LT Tray for Form 2 is recommended.
Flexible 80A, Flexible Resin and Elastic 50A comparison
Flexible Resin, after curing | Flexible 80A Resin, after curing | Elastic 50A Resin, after curing | |
Elongation at break (%) | 80 | 120 | 160 |
Tensile strength (MPa) | 7.7 - 8.5 | 8.9 | 3.2 |
Durometer/Shore hardness | 80 - 85A | 80A | 50A |
Tensile strength (kN/m) | 10.6 | 24 | 19.1 |
See the Data Sheets of the Formlabs Flexible 80A Resin on "Download Data Sheets" Tab.
Printer Options | |
Printing Technology | SLA/LFS |
Material Parameters | |
Polymerization | Needed |
Biocompatibility | No |
Layer Height (micron) | Form 2 - 50, 100. Form 3/3B/3+/3B+ - 50, 100. Form 3L/3BL - 100 |
Printer Compatibility | Form 2, Form 3/3+, Form 3B/3B+, Form 3L/3BL |
Resin Tank Compatibility | Form 2 LT, Form 3 Tank V1, Form 3 Tank V2/V2.1, Form 3L Tank |
Volume (L) | 1 |
Manufacturer Country | USA |
Flexible Resins
Download Technical Data Sheets for Flexible Resins:
Flexible Resin | |
Flexible 80A Resin | Flexible 80A Resin TDS (EN) |
Elastic Resin | Elastic Resin TDS (EN) |
Elastic 50A Resin | Elastic 50A Resin TDS (EN) |
Download Safety Data Sheets for Flexible Resins:
Flexible Resin | Flexible Resin SDS (EN) |
Flexible 80A Resin | Flexible 80A Resin SDS (EN) |
Elastic Resin | Elastic Resin SDS (EN) |
Elastic 50A Resin | Elastic 50A Resin SDS (EN) |