Menu
Your Cart

AgiBot A3 Ultra-Embodied Humanoid Robot

AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
New Free Training
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
AgiBot A3 Ultra-Embodied Humanoid Robot
  • Stock: In Stock
  • Product code: 827588000004140105
  • Weight Brutto: 72.00kg
487 619 zł
Ex Tax: 396 438 zł

Versatile humanoid robot for business and R&D

AGIBOT A3 Ultra-Embodied is a new-generation anthropomorphic robot standing 174 cm tall and weighing 60 kg, designed for commercial automation, the service sector and in-depth research in Embodied AI. Thanks to its 51-degree-of-freedom kinematics and OmniHand tactile hands, the robot confidently handles objects weighing up to 5 kg per arm. Spatial orientation is ensured by a 360-degree 3D LiDAR sensor array, binocular and RGB-D cameras; intelligent computing is performed by the NVIDIA Thor platform delivering up to 700 TOPS, while a high-capacity power unit provides up to 8 hours of operation without recharging.

AGIBOT A3 Ultra humanoid robot running
AGIBOT A3 Ultra-Embodied – a full-size humanoid robot with 51 degrees of freedom.

Key technological advantages of the AGIBOT A3 Ultra-Embodied

  • Anthropomorphic biomechanics and fine motor skills. The design combines 51 active degrees of freedom (2 in the neck, 7 in each arm, 3 in the waist, 6 in each leg) with highly sensitive OmniHand manipulators.
  • Delicate and powerful gripping. Each arm withstands a working load of up to 5 kg. The OmniHand tactile sensing makes it possible to pick up a thin sheet of paper or hold a heavy tool with equal precision.
  • All-round 360° spatial vision. The perception system integrates 3D LiDAR, a binocular RGB camera, RGB-D depth sensors and three wide-angle cameras for instant obstacle recognition and terrain analysis.
  • Centimetre-level navigation accuracy. Indoor localisation is based on UWB technology, while outdoors an RTK module is used, providing positioning accuracy of up to ±1 cm.
  • AI-server-class computing power. The additional NVIDIA Thor module delivers up to 700 TOPS, enabling local neural networks to run, routes to be built in real time and large streams of sensor data to be processed.
  • A full working shift without downtime. The 1152 Wh battery pack provides up to 8 hours of autonomy, and support for quick battery swapping reduces interruptions to a minimum.
  • An open ecosystem for developers. A full SDK and API give engineers direct access to control of the actuators, navigation, audio system and sensors, and also support wireless OTA updates.

Kinematics, materials and motion dynamics

The engineering architecture of the AGIBOT A3 Ultra-Embodied is based on 51 active joints that reproduce the natural fluidity of human movement. The 174 cm-tall load-bearing frame is made of lightweight magnesium alloy and high-strength carbon-fibre-reinforced nylon. These proportions allow the robot to use standard human infrastructure freely: opening doors, working at ordinary desks and moving along narrow corridors.

The powerful knee-joint actuators develop a peak torque of up to 320 N·m, giving the humanoid exceptional stability and dynamics. The model supports flexible pace adjustment: from smooth walking (1.2–1.8 m/s) in crowded places to rapid acceleration (2.5 m/s) and running at speeds of up to 5 m/s in test conditions.

AGIBOT A3 Ultra interacting with a person in a service environment
The AGIBOT A3 Ultra humanoid robot performing service tasks and interacting with people.

Intelligent sensing and navigation suite

For safe movement in a dynamic environment, the robot uses a multi-level sensor fusion system with 360° all-round vision. The upper unit, with 3D LiDAR, a binocular RGB camera and three surround-view cameras, is responsible for recognising objects and people, while the lower RGB-D camera continuously scans the surface underfoot to negotiate uneven ground safely.

The hybrid positioning system combines GPS/RTK satellite modules for outdoors with UWB ultra-wideband communication for indoors. The robot builds SLAM maps of locations on its own, plans optimal routes and avoids moving obstacles. Wi-Fi, Bluetooth and 4G/5G cellular modules are provided for continuous data exchange.

Control interface of the AGIBOT A3 Ultra humanoid robot
AGIBOT A3 Ultra – the software interface for controlling and monitoring the robot's systems.

Energy efficiency and non-stop 24/7 operation

The AGIBOT A3 Ultra's power supply is built around a dual-battery module with a total capacity of 1152 Wh. In a combined cycle (a 1:1 ratio of walking to standby), the operating range reaches 8 hours. Actual autonomous operating time varies depending on the intensity of manipulation, speed of movement and the weight of loads. The power system is adapted to continuous commercial use: the robot can park itself at a docking station for automatic charging, charge from a standard 110–220 V mains supply (up to 100% in less than 2 hours) or operate in hot-swap battery mode, which takes only 10 seconds.

Computing architecture and development

The brain of the AGIBOT A3 Ultra-Embodied is divided into three specialised computing nodes with a combined performance of up to 700 TOPS:

  • Motion control unit (MDU) based on the RK3588 processor – responsible for balance, kinematics and low-level real-time control of the actuators.
  • Human interaction unit (HDU) on the RK3588S2 chip – manages the head peripherals, speech recognition and the multimodal communication interface.
  • AI accelerator (ADU) based on NVIDIA Thor – powers heavy artificial intelligence models, cognitive task planning and visual navigation.

The platform is designed as an open environment for R&D: developers get access to low-level and high-level interfaces for integrating their own neural networks, SLAM algorithms and custom behaviour scenarios.

AGIBOT A3 Ultra in a research environment with VR control
AGIBOT A3 Ultra during teleoperation and neural network training in a research laboratory.

Application areas of the AGIBOT A3 Ultra-Embodied

  • Hospitality and restaurants. Greeting and escorting guests, navigating large halls, delivering orders and interactive consultation for visitors.
  • Corporate offices and business centres. Courier delivery of correspondence and small items between floors, integration with access control systems and lifts.
  • Retail and showrooms. Stocking goods on shelves, product demonstrations, assisting customers on the shop floor and collecting analytics.
  • Research institutes and laboratories. A ready-made hardware test bench for testing bipedal walking algorithms, computer vision, teleoperation and human–machine interaction.
  • Embodied AI development. An ideal platform for training multimodal models (VLA) that turn visual and voice commands into physical actions.
  • Light industry and logistics. Sorting components, packaging products and performing routine operations on production lines.
  • Museums, exhibitions and displays. Conducting interactive tours, engaging audiences and showcasing technological innovation.

What's included

The basic configuration and set of peripheral equipment for the AGIBOT A3 Ultra-Embodied are tailored individually to the customer's technical brief. Additional battery packs, charging stations, specialised manipulators and extended software licences are agreed at the order specification stage.

Technical specifications of the AGIBOT A3 Ultra-Embodied

Dimensions and mechanics

Parameter Value
Dimensions (H × W × D) 1740 × 520 × 300 mm
Net weight 60 kg
Number of degrees of freedom 51 DoF
Manipulator type OmniHand tactile hands
Load capacity per arm Up to 5 kg
Peak knee torque 320 N·m
Travel speed 1.2–5 m/s

Sensing, connectivity and navigation

Parameter Value
Optical sensors Binocular RGB camera, RGB-D cameras, 3 × 360° surround-view cameras
Laser scanning 3D LiDAR
Positioning technologies GPS, GPS RTK, UWB
Localisation accuracy Up to ±1 cm
Tactile sensors Shoulder touch sensors
Audio system 2 arrays of 8 microphones (front and rear), stereo speakers
Wireless interfaces Wi-Fi, Bluetooth, 4G/5G

Power and computing platform

Parameter Value
Battery capacity 1152 Wh 
Autonomous operating time Up to 8 hours
Charging parameters 110–220 V, full charge ≤ 2 h
Quick battery swap Supported (~10 seconds)
Computing modules NVIDIA Thor (ADU) + RK3588 (MDU) + RK3588S2 (HDU)
Total AI performance Up to 700 TOPS
Intelligent functions Autonomous navigation, dynamic obstacle avoidance
Developer tools Open SDK/API for secondary development, OTA support

Buy the AGIBOT A3 Ultra-Embodied

AGIBOT A3 Ultra-Embodied is a ready-made solution for technology companies, research laboratories, universities and businesses implementing robotic automation. Contact our specialists: we will help you put together the optimal hardware and software configuration for your tasks, check module compatibility and provide full support throughout delivery.

Details
Connectivity Wi-Fi, 4G/5G, Bluetooth, UWB, RTK
Power Requirements 110–220 V
Battery Capacity (mAh) 1152 Wh
Key Parameters
Type Humanoid Robot
Mobility Bipedal
Industry Education & Research, Advertising & Events
Certifications CE, FCC
Country of origin China
Weight & Dimensions
Dimensions netto (mm) 1740 × 520 × 300
Weight netto (kg) 60

Write a review

Please login or register to review