.jpg)
Buy Formlabs Fuse SLS 3D printers in Poland
C3D is the Authorized Representative of Formlabs Fuse in Poland.
On this page, you can buy cost-effective SLS 3D printers Formlabs Fuse, which print using SLS (Selective Laser Sintering) technology.
Formlabs are thoughtful and high-performance powder 3D printers, with which you always get printed parts of industrial quality.
You can order a 3D print of a free test sample and also see equipment samples in our showroom.
Important: When purchasing a 3D printer from Center 3D Print, you can receive free 3D equipment training. We also provide warranty and post-warranty technical support.
Brand: Formlabs
Model: Fuse Build Chamber
Buy Fuse Depowdering Kit for manual removal of SLS powderOn this page you can buy Fuse Depowdering Kit to manually remove SLS powder from the prints of your Formlabs Fuse 3D printer.This important stage of printing on an SLS 3D printer is quite a complex process, as you need to separate and clean th..
5 130 zł
Ex Tax:4 171 zł
Brand: Formlabs
Model: Fuse Build Chamber
Formlabs Fuse Build ChamberFuse Build Chamber is a necessary element of the Formlabs SLS 3D printing ecosystem. Here is the actual process of creating models takes place. Modular chambers and cartridges reduce equipment downtime. Create a continuous iterative workflow by moving modular Build Chamber..
18 720 zł
Ex Tax:15 220 zł
Brand: Formlabs
Model: Fuse Powder Cartridge
Formlabs Fuse Powder CartridgeFuse Powder Cartridge is included with the Formlabs High Efficiency Package. However, you may need more Cartridges to keep your SLS 3D printing going continuous.Cartridges are used to store and mix renewed and fresh SLS Powder, as well as to load it into the Fuse 3D pri..
800 zł
Ex Tax:650 zł
Brand: Formlabs
Model: Fuse Printer Stand
Formlabs Fuse printer standThe Formlabs Fuse Printer Stand keeps your printer on a secure, stable base during SLS 3D printing. The stand has a sturdy frame and four legs that help you to set the printer level. It is made of high-quality materials. It is compatible with Formlabs Fuse 1 and Formlabs F..
1 600 zł
Ex Tax:1 301 zł
Brand: Formlabs
Model: Fuse Series Optical Cassette
All selective laser sintering (SLS) printers require operators to clean the optics before each print, which often involves disassembling complex systems. Fuse 1 protects its optics with an optical cassette designed for tool-free removal and installation.Printer compatibility: Fuse 1, Fuse 1+ 30W..
1 420 zł
Ex Tax:1 154 zł
Brand: Formlabs
Model: Fuse Series Quartz Tube Heater
The Fuse QT heater provides even heating of the printer platform. Sold separately.Printer compatibility: Fuse 1, Fuse 1+ 30W..
290 zł
Ex Tax:236 zł
Brand: Formlabs
Model: Air Intake Filter
Fuse 1 Replacement Air Intake FilterThe Fuse 1 3D printer uses an intake filter to remove potential contaminants from air being drawn into the printer...
50 zł
Ex Tax:41 zł
Brand: Formlabs
Model: Air Exhaust Filter
Fuse 1 Replacement Air Exhaust FilterThe Fuse 1 3D printer uses an air exhaust filter to remove sintering byproducts from its exhaust...
400 zł
Ex Tax:325 zł
Brand: Formlabs
Model: Sift HEPA Air Filter
Sift HEPA Air Filter for Formlabs FuseA HEPA Air Filter is used in conjunction with the Formlabs Fuse Sift air handling system to filter out powder. This enables the Fuse Sift to maintain negative pressure under the hood and minimizes potential mess in the workspace...
800 zł
Ex Tax:650 zł
Brand: Formlabs
Model: Sift 150 Sieve
Sift 150 Sieve for SLS Fuse Printing SystemDuring part extraction on the Fuse Sift, unsintered SLS Powder is dislodged and funneled into the sifter below the workspace. This sieve with a mesh size of 150 microns filters out any small chunks or debris to keep the powder clean. The reclaimed powd..
480 zł
Ex Tax:390 zł
Brand: Formlabs
Model: Sift 300 Sieve
Sift 300 Sieve for SLS Fuse 1+ printing systemSift 300 Sieve for Fuse 1+ is required to extract parts in the Fuse Sift Powder Processing Station. The green SLS powder is knocked out and sent to the sieve under the workspace. This sieve with a mesh size of 300 microns is used for the reduction o..
480 zł
Ex Tax:390 zł
Brand: Formlabs
Model: Open Material Mode
Open Material Mode for Formlabs printersOpen Material Mode for Formlabs 3D printers. It allows experienced users to print with any 405 nm photopolymer on Formlabs printers. It is part of the Formlabs Open Platform, which consists of the following solutions:Certified MaterialsPrint Settings Edit..
11 070 zł
Ex Tax:9 000 zł