-5 %
3D printer Creality Ender-3 S1
The lowest price in the last 30 days
2282 PLN
- Stock: In Stock
2 282 zł
2 393 zł
Ex Tax: 1 855 zł
Available Options
3D printer Creality Ender-3 S1
Creality Ender-3 S1 is a 3D printer with a build field of 220 × 220 × 270 mm. It is interesting for such facts as: automatic calibration of the printing table; high-quality print results thanks to the Sprite direct feed extruder; flexible adhesive coating of the desktop; dual synchronization along the Z axis; support for many filaments, including flexible ones; and the possibility of purchasing additional modules for LED lighting and laser engraving.
Creality Ender-3 S1 Key Features
- Build volume 220 × 220 × 270 mm.
- Sprite direct feed twin gear extruder compatible with multiple filaments.
- Automatic calibration CR Touch.
- 32-bit silent 3D printing board.
- Safe and stable Z-axis thanks to two precision screws.
- Quick assembly. The printer is shipped in 96% assembled condition.
- Flexible desktop cover.
- Easy operation with 4.3" color touchscreen.
- Convenient interface.
High quality 3D printing
- High quality printing with "Sprite" direct extruder. Powerful Sprite extruder, Creality's own design, which uses two chrome steel gears with a gear ratio of 1:3.5 to create a force of 80 N. The filament feeds smoothly without slipping, which is very good when printing with flexible plastics such as TPU.
- The automatic and precise alignment of the CR Touch print platform eliminates time-consuming manual calibration. Simple and convenient intelligent calibration system automatically compensates for table height in 16 points.
- Dual Z-Axis Synchronization With a dual Z-axis design that is synchronized by two motors, the Ender-3 S1 runs more smoothly and in sync. This improves print quality by reducing the chance of lines and ridges appearing on the surface of the printed model.
- The build platform consists of a flexible adhesive PC cover, a durable steel sheet and a magnetic backing. All this contributes to the reliable fastening of the printed model during its construction, and easy removal after completion.
- The new quiet 32-bit motherboard contributes to the quiet operation of the printer. Operating noise below 50 dB.
- 4.3-inch display with user-friendly interface and automatic backlight turn-off after 5 minutes of inactivity.
- The Ender-3 S1 has convenient features to resume printing in the event of a power failure and a built-in filament sensor.
- The printer is shipped in 96% assembled condition. You will need to go through the last 6 assembly steps.
- The Ender-3 S1 comes pre-installed with interfaces for laser engraving and LED illumination. By purchasing these modules separately, you can use these functions.
- Manual belt tensioner. The Belt Tensioner is an easy-to-use tool that helps prevent problems such as layer shifting caused by under-tensioning.
Additional services when buying a 3D printer
Services available:
- Assembling the Creality Ender 3 S1 3D printer.
- Training to work with a 3D printer and related software.
Buy a high-quality Creality 3D printer
Printer Options | |
Printing Technology | FDM |
Build Field (mm) | 220*220*270 |
Ø Of Plastic (mm) | 1,75 |
Print Temperature (°C) | Up to 270 |
Number Of Extruders | 1 |
Chamber Type | Open |
Heating The Chamber | No |
Plastic Drying | No |
Autocalibration | Yes |
Feeder Type | Direct |
Layer Height (micron) | 100 - 350 |
Extruder Construction Type | "Sprite" Direct Extruder with 1:3.5 Gear Ratio |
Leveling System | CR Touch |
Nozzle Diameter (mm) | 0,4 |
Maximum Nozzle Temperature (°C) | 260 |
Printing Accuracy (µm) | 100 |
Print Speed (mm/s) | Up to 150 |
Platform Heating | Yes |
Maximum Platform Temperature (°C) | 100 |
Platform Material | Removable PC Spring, Steel Print Sheet |
Supported Materials | PLA, TPU, PETG, ABS |
Running Noise, dB | < 50 |
Language | English, Chinese |
CPU | 32-bit silent mainboard |
Control | 4,3" color touchscreen |
Assembly Type | Semi-assembled |
Features | Automatic bed leveling CR Touch, PC Spring steel print sheet, low noise level, resume printing, filament sensor, simple assembling, precet interfaces for laser engraving and LED light |
Supported File Types | STL, OBJ, AMF |
Software | Creality Slicer, Cura, Repetier-Host, Simplify3D |
Connectivity | Type-C USB, SD card |
Power Input | 115/230 V |
Power Output | 350 W |
Manufacturer Country | China |
Warranty Period (months) | 12 |
Certifications | CE, FCC, UKCA, PSE, RCM |
Weight & Dimensions | |
Weight Netto (kg) | 9,1 |
Dimensions Netto (mm) | 540×510×260 |
Dimensions Assembled (mm) | 487×453×522 |
Weight Brutto (kg) | 11,2 |