Brand: Plexiwire
Model: 1,75 mm / 300 m / 0,9 kg
PLA.PLA (PLA, polylactide) - biodegradable plastic made from renewable resources (corn). The physical properties of PLA plastic are similar to ABS - it is also a hard and brittle polymer (the stiffness of PLA is even greater), but with a minimum shrinkage factor and high interlayer adhesion as in AB..
76 zł
Ex Tax:62 zł
Brand: Plexiwire
Model: 1,75 mm / 400 m / 1,185 kg
PLA.PLA (PLA, polylactide) - biodegradable plastic made from renewable resources (corn). The physical properties of PLA plastic are similar to ABS - it is also a hard and brittle polymer (the stiffness of PLA is even greater), but with a minimum shrinkage factor and high interlayer adhesion as in AB..
79 zł
Ex Tax:64 zł
Out Of Stock
Brand: Plexiwire
Model: 1,75 mm / 400 m / 1,0 kg
ABS+ PlexiwireABS+ Plexiwire is a modified ABS designed specifically for 3D printing. Special additives, first of all, made it possible to increase adhesion and avoid delamination of the model during printing. Also, the modified ABS has a lower shrinkage factor, which, together with improved ad..
79 zł
Ex Tax:64 zł
Brand: Plexiwire
Model: 1,75 mm / 300 m / 0,9 kg
PETG filament Plexiwire 1,75 mm (300 m / 0,9 kg)PETG plastic Plexiwire is a modified version of the well-known engineering PET plastic, in which glycol is added to the base material (polyethylene terephthalate). The result is a completely new material with different properties. PETG does not crystal..
76 zł
Ex Tax:62 zł
Brand: Plexiwire
Model: 1,75 mm / 400 m / 1,2 kg
PETG filament Plexiwire 1,75 mm (300 m / 0,9 kg)PETG durable plastic Plexiwire is a modified version of the well-known engineering PET plastic, in which glycol is added to the base material (polyethylene terephthalate). The result is a completely new material with different properties. PETG does not..
92 zł
Ex Tax:75 zł
Out Of Stock
Brand: Plexiwire
Model: 1,75 mm / 300 m / 0,825 kg
NYLON filament PlexiwireDo you need gears for your drone, robot, or other machinery? Use Nylon.This engineering plastic has a low coefficient of abrasion, which allows parts printed with this material to last long where movement is needed.Nylon has less shrinkage than unmodified polyamide, but ..
75 zł
Ex Tax:61 zł
Out Of Stock
Brand: Plexiwire
Model: 1,75 mm / 400 m / 1,1 kg
NYLON PA6Do you need gears for your drone, robot, or other machinery? Use Nylon.This engineering plastic has a low coefficient of abrasion, which allows parts printed with this material to last long where movement is needed.Nylon has less shrinkage than unmodified polyamide, but it should still..
100 zł
Ex Tax:81 zł
Brand: Plexiwire
Model: 1,75 mm / 300 m / 0,9 kg
Flexible filament 90AHighly flexible material, tear-resistant and inert in aggressive liquid material (oil / acid / alkaline).And to put it simply - gaskets, oil seals, anthers - any protection elements - this is Flex.Or maybe you want to come up with a new sole for Nike? Or an off-road rubber ..
109 zł
Ex Tax:89 zł
Showing 1 to 8 of 8 (1 Pages)