Your Cart

Cartridge Formlabs Model Resin, 1L

Photopolymer Formlabs Model Resin

Model Resin is a highly effective material for models of crowns and other products for the field of orthodontics. For maximum accuracy, use 25 micron print settings.

Professional 3D SLA printers are one of the most versatile tools that can be found in dental laboratories and practices, and the key to their versatility is special photopolymers. Dental applications have different requirements - some must be strong and durable, others must be biocompatible for use in surgery, and some require a transparent view of aesthetics.

One of the most popular materials by dentists was resin for orthodontic models. High-precision models of patient crowns and bridges are used to check the final restorations before the procedure. Traditional gypsum dental models are based on analog casts of the patient's anatomy and require a time-consuming manual process to create. Making these models in digital form with 3D scanning can simplify and speed up the workflow, reduce costs.

The development of Formlabs Dental Model Resin for Formlabs Form 2 was a huge challenge. Crown and bridge model printing is one of the most demanding dental applications, requiring accuracy below +/- 50 microns at the edges and points of contact and +/- 100 microns throughout the arch. Expressed as a proportion, it represents a deviation of +/- 0.17 percent above the arch of 60 mm.

Application of Formlabs Model Resin in dentistry

Formlabs Dental Model Resin is a material that has the same strength as the plaster that dentists have used for decades. For the Dental Model, settings have been optimized that are only suitable for dental programs, given their smaller size and dense margins. It also simplifies 3D printing directly on the assembly platform, which significantly saves printing time and labor costs during further processing.

The results of our research convincingly show that printing with settings of 50 microns or 25 microns will give clinically accurate models with minimal and global accuracy. 50 micron printing allows you to get fairly accurate models of crowns and bridges, while the most precise setting of 25 microns gives results that far exceed all expectations!

Supports print resolution: 100, 50 and 25 microns (in Form 2, Form 3 and Form 3B 3D printers); 140 μm (Form 2).

Post-curing required.

Clinically accurate Formlabs Model Resin models

Buy Model Resin for 3D printer Formlabs

See the Data Sheets of the Formlabs Model Resin on "Download Data Sheets" tab

Printer Options
Printing Technology SLA/LFS
Material Parameters
Polymerization Needed
Biocompatibility No
Layer Height (micron) Form 2 - 25, 50, 100, 140. Form 3/3+ - 25, 50, 100. Form 3B/3B+ - 25, 50, 100. Form 3L/3BL - 50
Printer Compatibility Form 2, Form 3/3+, Form 3B/3B+, Form 3L/3BL
Resin Tank Compatibility Form 2 Resin Tank (PDMS), Form 2 LT Tank, Form 3/3B Resin Tank V1, Form 3/3B Resin Tank V2, Form 3/3B Resin Tank V2.1, Form 3L/3BL Resin Tank V1
Build Platform Compatibility Form 3 Build Platform 2
Volume (L) 1
Manufacturer Country USA

Standard Resins

Download Technical Data Sheets for Standard Resins:

Clear Resin

White Resin

Grey Resin

Black Resin

Color Base Resin

Clear White Grey Black Color Resin TDS (EN)
Draft Resin
Draft V2 Resin TDS (EN)
Model Resin
Model Resin TDS (EN)

Download Safety Data Sheets for Standard Resins:

Clear Resin
Clear Resin SDS (EN)
White Resin
White Resin SDS (EN)
Grey Resin
Grey Resin SDS (EN)
Black Resin
Black Resin SDS (EN)
Color Base Resin
Color Base Resin SDS (EN)
Draft Resin
Draft V2 Resin SDS (EN)
Color Kit Pigments
Color Pigments SDS (EN)
Model Resin
Model Resin SDS (EN)

Write a review

Please login or register to review
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy