How to get a free Formlabs sample

Request a Free Formlabs Sample 3D Print

Want to be convinced of the quality of materials and 3D printing quality of Formlabs 3D printers? Getting a free Formlabs sample is easy! Choose a sample and contact our managers (see the Contacts page) to receive it. We will send you a free sample of the material you are interested in.

The polymers used in LFS 3D printing on the Form 4, Form 3, Form 3L or SLS Fuse 1 3D printer are developed in Formlabs laboratories and tested according to international standards. The Formlabs portfolio now includes a range of functional polymers with special application properties. Evaluate the 3D printing quality and functional characteristics of the selected polymer.

Formlabs Clear Resin sample part

A component made of Clear Resin, printed on a Form 3 3D printer. Models made of this material have a polished surface of amazing quality. In addition, such elements have an almost optical transparency. The polymer is ideal for working with light or showing internal functions.

• High resolution
• It has a clean optically transparent surface
• Additional polymerization is not required

Formlabs Grey Resin

Formlabs' free sample of Grey Resin polymer. Used for prototyping and general design, perfect for capturing small parts.

• High resolution
• Clean matte surface that perfectly captures fine details
• Subsequent curing is not required

Free sample from Draft Resin polymer

Formlabs' free sample of Draft Resin. This photopolymer prints parts 4 times faster than other standard resins. It is an ideal material for iterative prototyping. This detail sample features three swords attached to a raft, allowing you to experience the ease of removing the support. A single sword can be printed in just 17 minutes using Draft Resin.

• Initial prototypes
• Fast iterations
• High throughput

Pen made of standard Black Resin photopolymer

Black Resin polymer is designed for 3D printing models with very thin parts and intricate details. Free Formlabs Sample.

• High resolution
• Clean matte surface
• Subsequent curing is not required

Gray Pro Resin engineering material

Gray Pro is ideal for conceptual modeling and functional prototyping, especially for parts that will undergo repeated processing.

Material properties:

• Tensile strength - 61.2 MPa
• Modulus of elasticity (tension) - 2.6 GPa
• Modulus of elasticity (bending) - 2.0 GPa
• Relative elongation - 13.0%

Architectural model made with Formlabs White Resin

With White Resin, you can easily print smooth surfaces and details. Ideal for finished presentations or as a base for color prints.

• High resolution
• Surface cleanliness
• Subsequent curing is not required

Durable Resin gears

Durable Resin is used to print parts with a smooth glossy surface and high resistance to deformation. Finally, this material has low elastic modulus, high elongation and high bonding. Use this material for parts where minimal friction is required.

Material properties:

• Tensile strength - 28 MPa
• Modulus of elasticity (tensile) - 1.0 GPa
• Izod impact test - 114 J/m
• Heat distortion temperature - @0.45 MPa 41 °C

Tough 1500 Resin Spring

Photopolymer Tough 1500 Resin enables the production of rigid and flexible parts that bend and compress quickly under cyclic loading. The combination of stiffness and elongation in this resin makes it possible to repeatedly compress a spring and restore its shape. It is a three-part component: a base, a spring placed on the resistance and a top part pressed against the spring.

Material properties:

• Tensile strength - 33 MPa
• Modulus of elasticity (tensile) - 1.5 GPa
• Izod impact test - 67 J/m
• Thermal deformation temperature - @0.45 MPa 52 °C

Tough 2000 Resin free sample part

Tough 2000 is the hardest and stiffest material in the Formlabs Tough and Durable Resin family. This makes it ideal for prototyping strong parts that cannot bend easily.

Material properties:

• Tensile strength - 46 MPa
• Modulus of elasticity (tensile) - 2.2 GPa
• Izod impact test - 40 J/m
• Thermal deformation temperature - @0.45 MPa 63 °C

High Temp Resin Hair Dryer Concentrator

High Temp Resin V2 can withstand thermal stresses up to 238 °C at 0.45 MPa. This makes it ideal for static applications that will be exposed to higher temperatures.

Material properties:

• Thermal deformation temperature - @ 0.45 MPa 238 °C (for the V2 version of the material) and 289 °C (V1 version)

Glass-reinforced Rigid 10K Resin free sample part

Rigid 10K Resin is the stiffest material in the Formlabs engineering family. This fiberglass-filled material mimics the strength of glass and fiber-reinforced thermoplastics. This multi-function tool includes a screwdriver, bottle opener and three allen wrenches to demonstrate the material's resistance to deformation under various forces and torques.

Material properties:

• Tensile strength - 65 MPa
• Modulus of elasticity (tension) - 10 GPa
• Modulus of elasticity (bending) - 9 GPa

Rigid 4000 Resin impeller

Rigid 4000 Resin is reinforced with fiberglass. This provides high rigidity and a polished surface. It is ideal for rigid and strong parts that can withstand minimal deflection. Thin-walled parts are printed from this material.

Material properties:

• Tensile strength - 75.2 MPa
• Modulus of elasticity (tension) - 4.1 GPa
• Modulus of elasticity (bending) - 3.7 GPa

Soft Elastic 50A Resin Artery Model

Elastic 50A Resin is Formlabs' softest engineering resin. It is suitable for printing parts that bend, stretch, shrink and withstand repeated cycles without cracking. This pattern is a design interpretation of a pulmonary artery.

Material properties:

• Tensile strength limit - 3.32 MPa
• Percent elongation after rupture - 160%
• Tensile strength - 19.1 kN/m
• 70C compression - 9%
• Shore hardness scale - 50A

Free sample of Flexible 80A Resin

Flexible 80A Resin is the stiffest flexible material among Formlabs' flexible and resilient resins with a hardness of 80 Shore degrees. It simulates the elasticity of rubber or TPU. By balancing softness and strength, Flexible 80A Resin can withstand bending and compression even with repeated cycling. It is the choice for tougher, flexible parts that slowly recover their shape after deformation. It supports printing resolution: 100 and 50 microns. Subsequent curing is required.

Material properties:

• Tensile strength limit - 8.9 MPa
• Percent elongation after break - 120%
• Tensile strength - 24 kN/m
• Shore hardness scale - 80A

Castable Wax Resin material for jewelers

Castable Wax Resin accurately prints the most intricate jewelry details due to its high strength. This resin contains 20% wax, providing a clean and reliable casting that mimics traditional casting technology. Formlabs recommends this material for try-on and direct lost-wax casting for delicate and thin pieces with fine details. For excellent, reproducible results, simply follow the manufacturer's suggested firing schedule.

Peculiarities:

• Lightweight fancy decorations
• One material for prototyping and production
• No additional curing required

Jewelry model with Castable Wax 40 Resin

The jewelry polymer filled Castable Wax 40 Resin provides exceptional casting performance for the most demanding projects. Castable Wax 40 contains a 40% blend of hard and soft waxes. Its low thermal expansion makes it a recommended material for direct casting in a wide range of styles, from heavy rings and medallions to lightweight bridal jewelry.

Peculiarities:

• Cleanly cast stone frames, embossed text and heavy objects
• Benefit from plaster molding and standard firing
• No additional curing required

Sample of High Temp Resin jewelry model

High Temp Resin is also recommended for use in room temperature vulcanization (RTV) and high temperature vulcanization of natural rubber. Vulcanization makes it possible to create a mold that can make multiple copies of wax models for a faster and easier wax melting process.

Peculiarities:

• Thermal deflection temperature - @0.45 MPa 238 °C

Fan adapter made of biocompatible BioMed Clear Resin

BioMed Clear Resin is a tough, durable material for biocompatible applications requiring long-term contact with skin or mucous membranes. This USP Class VI-certified material is suitable for applications requiring wear resistance and low water absorption over time. Parts printed with BioMed Clear Resin are compatible with ordinary sterilization methods. BioMed Clear resin is manufactured by Formlabs in accordance with ISO13485 and is supported by FDA device master files.

Singularities:

• Medical equipment and device components
• Fan components and protective clothing
• Biotechnology equipment
• Drug delivery devices
• Research and studies

Formlabs Nylon 11 printed on Fuse SLS 3D printer

Nylon 11 Powder, which combines strength and detail. It is a high-performance material for both functional prototyping and end-use of complex weaves and durable parts with a high degree of environmental sustainability. Printed on Fuse 1 without supports. This sturdy case includes moving parts printed together and an internal card that demonstrates printing functions.

Singularities:

• High-performance prototyping
• Small batch production
• Solid instruments
• Biocompatible, sterilizable parts*.

*Material properties may vary depending on part design and manufacturing practices. The part manufacturer is responsible for verifying the suitability of the printed parts for the intended application.

Nylon 12 sample 3D printed on Formlabs Fuse

Nylon 12 Powder, which combines strength and detail. It is a high-performance material for both functional prototyping and end-use of complex assemblies and durable parts with high environmental sustainability. Printed on Fuse 1 without feet, this rugged chassis features moving parts printed together and an internal card demonstrating printing functions.

Special features:

• High-performance prototyping
• Small batch production
• Fixed mounts and tools
• Biocompatible, sterilizable parts*.

*Material properties may vary depending on part design and manufacturing practices. The part manufacturer is responsible for verifying the suitability of the printed parts for the intended application.