Menu
Your Cart

3D printer Creality Ender-3 S1

3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
-5 %
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
3D printer Creality Ender-3 S1
  • Stock: In Stock
2 282 zł
2 393 zł
Ex Tax: 1 855 zł

Available Options

3D printer Creality Ender-3 S1

Creality Ender-3 S1 is a 3D printer with a build field of 220 × 220 × 270 mm. It is interesting for such facts as: automatic calibration of the printing table; high-quality print results thanks to the Sprite direct feed extruder; flexible adhesive coating of the desktop; dual synchronization along the Z axis; support for many filaments, including flexible ones; and the possibility of purchasing additional modules for LED lighting and laser engraving.


Creality Ender-3 S1 Key Features

  • Build volume 220 × 220 × 270 mm.
  • Sprite direct feed twin gear extruder compatible with multiple filaments.
  • Automatic calibration CR Touch.
  • 32-bit silent 3D printing board.
  • Safe and stable Z-axis thanks to two precision screws.
  • Quick assembly. The printer is shipped in 96% assembled condition.
  • Flexible desktop cover.
  • Easy operation with 4.3" color touchscreen.
  • Convenient interface.

High quality 3D printing

  • High quality printing with "Sprite" direct extruder. Powerful Sprite extruder, Creality's own design, which uses two chrome steel gears with a gear ratio of 1:3.5 to create a force of 80 N. The filament feeds smoothly without slipping, which is very good when printing with flexible plastics such as TPU.


Ender-3 S1 3D printer Creality - quality printing buy in Poland


  • The automatic and precise alignment of the CR Touch print platform eliminates time-consuming manual calibration. Simple and convenient intelligent calibration system automatically compensates for table height in 16 points.


Creality Ender 3 S1 automatic calibration


  • Dual Z-Axis Synchronization With a dual Z-axis design that is synchronized by two motors, the Ender-3 S1 runs more smoothly and in sync. This improves print quality by reducing the chance of lines and ridges appearing on the surface of the printed model.


Creality Ender 3 S1 z-axis synchronization


  • The build platform consists of a flexible adhesive PC cover, a durable steel sheet and a magnetic backing. All this contributes to the reliable fastening of the printed model during its construction, and easy removal after completion.


Ender-3 S1


  • The new quiet 32-bit motherboard contributes to the quiet operation of the printer. Operating noise below 50 dB.


New quiet 32-bit motherboard


  • 4.3-inch display with user-friendly interface and automatic backlight turn-off after 5 minutes of inactivity.


Ender-3 S1


  • The Ender-3 S1 has convenient features to resume printing in the event of a power failure and a built-in filament sensor.



Ender-3 S1


  • The printer is shipped in 96% assembled condition. You will need to go through the last 6 assembly steps.


Ender-3 S1


  • The Ender-3 S1 comes pre-installed with interfaces for laser engraving and LED illumination. By purchasing these modules separately, you can use these functions.



  • Manual belt tensioner. The Belt Tensioner is an easy-to-use tool that helps prevent problems such as layer shifting caused by under-tensioning.



Additional services when buying a 3D printer

Services available:

  • Assembling the Creality Ender 3 S1 3D printer.
  • Training to work with a 3D printer and related software.


Buy a high-quality Creality 3D printer


Printer Options
Printing Technology FDM
Build Field (mm) 220*220*270
Ø Of Plastic (mm) 1,75
Print Temperature (°C) Up to 270
Number Of Extruders 1
Chamber Type Open
Heating The Chamber No
Plastic Drying No
Autocalibration Yes
Feeder Type Direct
Layer Height (micron) 100 - 350
Extruder Construction Type "Sprite" Direct Extruder with 1:3.5 Gear Ratio
Leveling System CR Touch
Nozzle Diameter (mm) 0,4
Maximum Nozzle Temperature (°C) 260
Printing Accuracy (µm) 100
Print Speed (mm/s) Up to 150
Platform Heating Yes
Maximum Platform Temperature (°C) 100
Platform Material Removable PC Spring, Steel Print Sheet
Supported Materials PLA, TPU, PETG, ABS
Running Noise, dB < 50
Language English, Chinese
CPU 32-bit silent mainboard
Control 4,3" color touchscreen
Assembly Type Semi-assembled
Features Automatic bed leveling CR Touch, PC Spring steel print sheet, low noise level, resume printing, filament sensor, simple assembling, precet interfaces for laser engraving and LED light
Supported File Types STL, OBJ, AMF
Software Creality Slicer, Cura, Repetier-Host, Simplify3D
Connectivity Type-C USB, SD card
Power Input 115/230 V
Power Output 350 W
Manufacturer Country China
Warranty Period (months) 12
Certifications CE, FCC, UKCA, PSE, RCM
Weight & Dimensions
Weight Netto (kg) 9,1
Dimensions Netto (mm) 540×510×260
Dimensions Assembled (mm) 487×453×522
Weight Brutto (kg) 11,2

Write a review

Please login or register to review
Cookies
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy