Plexiwire basic resin 0.5 kg white buy in Warsaw
Photopolymer designed for general modeling and printing of prototypes.
Volume - 500 ml.
Plexiwire resin basic resin is a photopolymer for 3D printing on SLA / DLP printers.
Model photopolymer used for general modeling and printing of prototypes of engineering high-precision parts.
By its properties, Plexiwire resin basic is a hard, hard, non-brittle polymer.
- The minimum speed of illumination of a layer is 6 seconds;
- The minimum printing layer is 30 microns;
- Effective ultraviolet range 405 nanometers (nm).
|Features of packing||Additional 50 g for tests|
|Ultraviolet range||220 - 405 nm|
|Hardness||80D on the Shore scale|
|The minimum layer thickness||30 microns|
|Minimum layer illumination time||6 seconds|
|Printing accuracy||+/- 0,05 mm|
|Recommended additional lighting||For 2 - 6 hours|