Menu
Your Cart

PET-G Glow in the Dark filament Spectrum Filaments 1,75 mm / 1,0 kg

3D plastic phosphorescent PETG 1.0 kg

Phosphorescent PET-G plastic that glows in the dark. Used for 3D printing spectacular models that can glow in the dark after being built under the influence of light. This material is based on PET-G, by adding concentrated phosphorescent pigment, which causes the effect of phosphorescence. The material has all the typical characteristics of pure PET-G - the added pigment does not affect the properties of the material.

The addition of phosphorescent pigment to PET-G provides the following properties of printed products:

  • The ability to emit its own light after prior exposure to an external light source.
  • Ability to "control" the light intensity of printed products by adjusting the wall thickness and density of the filler.

Keep in mind: to achieve a stronger and longer lasting glow effect, leave the model in the light for a long time. The presence of phosphorescent pigment can also cause wear of the brass nozzle. Therefore, for long-term printing with Spectrum PET-G Glow in the Dark thread, it is recommended to use stainless steel nozzles.

Characteristics

  • Unbelievably strong after-glow effect.
  • High aesthetic surface quality.
  • Warp-free printing.
  • Perfect layer adhesion.

Application of PET-G Glow in the Dark

  • Production of items with major ornamental and artistic effects.
  • Production of items to help identify emergency exits for power outages.
  • Advertising and broadly defined decoration industry.
  • Manufacturing of various souvenirs, luminous pictures, glowing gadgets and figurines.

Phosphorescent PET-G material for 3D printing on a printer

Packaging

A 1.0 kg filament is wound on a transparent spool, which contains information about the type of material, diameter, color and recommended printing temperature. Each coil is packed in a vacuum with a dehumidifier. All in the original Spectrum Filaments foil cardboard.

Coil dimensions

  • Outer diameter - 200 mm.
  • Width - 67 mm.
  • Inner diameter - 52 mm.
  • Weight of empty coil - ± 250 g.

Verify quality of 3D plastic thread 

Spectrum Filaments is the only company in Poland and one of the few in the world that has a tool for testing purchased filaments. VERIFY YOUR SPOOL is the most accurate quality control system on the market, ensuring that Spectrum Filaments products meet his stringent requirements.

Filament for 3D printers is produced by free extrusion, which is one of the most difficult extrusion processing technologies, due to the particularly significant influence of process parameters on product dimensions and material homogenization. During the manufacturing process, each 1mm of Spectrum Filaments is continuously measured in 2 axes with an accuracy of ±0.8 µm, resulting in a quality end product. To prove this, Spectrum Filaments, as one of the few manufacturers in the world, has introduced the possibility of an online presentation, individually for each coil produced:

  • diameter travel along the entire length of the coil;
  • average diameter;
  • ovality;
  • standard deviation.

Buy in Poland PET-G filament for 3D printing


FDM materials
Ø of plastic (mm) 1,75
Print temperature (°C) Up to 270
Material PET-G
Diameter Tolerance (mm) +/- 0,05
Density (g/cm3) 1,27
Colours Blue, Yellow-green
Printing options
Print temperature (°C) 230 - 255
Bed temperature (°C) 60 - 80
Heated bed Necessary
Closed chamber Not required
Active cooling fan (%) Up to 100
Flowrate (%) 100 - 105
Print speed (mm/s) 40 - 110
Retraction - direct (mm) 1 - 3
Retraction - bowden (mm) 4 - 6
Retraction speed (mm/s) 25 - 45
Weight Netto (kg) 1,0
Weight Brutto (kg) 1,4
Manufacturer country Poland

Write a review

Please login or register to review
Cookies
Ladies and Gentlemen, from May 25, 2018, Regulation (EU) 2016/679 of the European Parliament and of the Council of April 27, 2016 in short GDPR applies. In accordance with the Regulation, we need your consent to process personal data stored in cookies. More details in the Privacy Policy and the Cookies Policy. I consent to the storage of the so-called cookies on the device I use and for the processing of my personal data remaining when using the websites and other parameters stored in cookies. If you do not agree, please leave this page.