Menu
Your Cart

20% OFF on all products Shop now

ABS + plastic Plexiwire for 3D printer 1.75 mm blue (400 m / 1 kg)

ABS + is a modified ABS designed specifically for 3D printing. Special additives, first of all, made it possible to increase adhesion and avoid delamination of the model during printing. Also, the modified ABS has a lower shrinkage factor, which, together with improved adhesion, reduces the warping of the model (when the edges of the model come off the table and bulge) to a minimum.

ABS + is less brittle, but at the same time retains all the strength characteristics of conventional ABS. This allows it to be used in printing elements that are subject to dynamic stresses such as bending and vibration. Also, ABS + has a lower abrasion rate, which allows it to be used when printing moving parts.

ABS + print parameters are in the same ranges as regular ABS, so you don't need a special printer for this.

So ABS + is:

  • Improved formula of conventional ABS - for printing without delamination, warping, and with improved adhesion.
  • Durability - ABS + can handle more dynamic loads than ABS.
  • Improved adhesion - when printed, the layers stick together better, which makes the model stronger than ABS.
  • Great detail - ABS + printed models are excellent at high resolution printing.
The main
Thread diameter 1,75 +/- 3%
Length 400 m
The weight 1kg+/- 3%

Write a review

Please login or register to review
Cookies
Ladies and Gentlemen, from May 25, 2018, Regulation (EU) 2016/679 of the European Parliament and of the Council of April 27, 2016 in short GDPR applies. In accordance with the Regulation, we need your consent to process personal data stored in cookies. More details in the Privacy Policy. I consent to the storage of the so-called cookies on the device I use and for the processing of my personal data remaining when using the websites and other parameters stored in cookies. If you do not agree, please leave this page.