Menu
Your Cart

3D printer Flashforge Finder 3

3D printer Flashforge Finder 3

Developed on the base of the entry-level Flashforge Finder, the Flashforge Finder 3 3D printer is a version for more demanding users. It has a larger working space of 190×195×200 mm. The Z-axis is 200 mm, which gives more options to print more sized models. The reinforced design of the direct feed extruder with a heating temperature of up to 260 °C allows you to achieve smoother filament extrusion and print with flexible materials as well. Finder 3 works with filaments such as PLA, ABS, HIPS, PETG, PETG PRO, TPU 95A, etc. Also new to the Finder 3 are automatic resume printing in case of power loss and a filament run-out sensor that will notify and pause printing, then resume printing after a spool change.


Finder 3 main features

  • Large build volume 190×195×200 mm.
  • Direct Drive Extruder.
  • Printing not only with ordinary plastics PLA, PETG, but also flexible as TPU 95A.
  • Choice of build platform: glass plate and PEI magnet plate. Choose for first layer better adhesion or finished model better removal.
  • High safety with thermal protection function when hot end overheating.
  • Thread run-out sensor and resume printing function when power loss.
  • Wi-Fi connection and cloud printing.


Printing not only with ordinary plastics PLA, PETG, but also flexible as TPU 95APrinting not only with ordinary plastics PLA, PETG, but also flexible as TPU 95A.


Using Finder 3

This 3D printer is ideal for amateur and home use, for teaching children in elementary and high schools. An additional advantage of the Finder 3 is that it does not require special assembly skills, as it comes pre-assembled and is easy to set up before the first print. The printer has Wi-Fi connectivity for remote control and printing, additional lighting on the extruder to illuminate the print area, and a choice of dual platforms: a removable glass platform and a flexible PEI magnetic steel platform.


Multiple nozzle options

Adding to its versatility, the FlashForge Finder 3 3D printer can handle a variety of nozzle sizes. Along with the 0.4 mm nozzle installed, it also prints with 0.3 mm and 0.6 mm nozzles. Choose nozzles of different diameters for greater accuracy or faster 3D printing speed. With a nozzle of 0.6 mm, it is good to print with special filaments that contain an abrasive component.


FlashForge Finder 3 3D printer Direct Drive extruder - nozzles


Finder 3 thermal safety

Важлива для початківців та для навчальних приладів функція безпеки друку: у FlashForge Finder 3 додано функцію теплового захисту. Принтер контролює температуру екструдера, і в разі її підвищення під час друку - розпочинає процес захисту та припинить друк.

An important print safety feature for beginners and training devices: FlashForge Finder 3 has added thermal protection. It monitors the extruder temperature, and if it abnormal increases while printing, printer starts the protection process and stops printing.


Finder 3 thermal safety


Manage 3D printing from anywhere

Finder 3 features a Flashprint slicer, as well as a cloud-based platform to upload and share models, start printing, monitor and control the process. It is also convenient that the print history and all the models you have worked with are stored in your personal cloud account.


Buy Flashforge Finder 3 in Krakow, Warsaw, Wroclaw, Szczecin


Printer Options
Printing Technology FDM/FFF
Build Field (mm) 190*195*200
Ø Of Plastic (mm) 1,75
Print Temperature (°C) Up to 270
Number Of Extruders 1
Chamber Type Open
Filament Chamber Type Open
Heating The Chamber No
Plastic Drying No
Autocalibration No
Feeder Type Direct
Layer Height (micron) 100 - 400
Nozzle Diameter (mm) 0.4 (optional 0.3, 0.6)
Maximum Nozzle Temperature (°C) 260
Printing Accuracy (µm) 200
Print Speed (mm/s) 10 - 180
Platform Heating Yes
Maximum Platform Temperature (°C) 110
Platform Material Glass, PEI Magnet Build Plate
Supported Materials PLA, ABS, PETG, TPU 95A, HIPS
Running Noise, dB < 50
Control 4.3" touchscreen
Assembly Type Assembled
Features Filament Run-out Sensor, Resume Printing
Supported File Types 3MF, STL, OBJ, FPP, BMP, PNG, JPG, JPEG, GX/G, GCODE
Software FlashPrint, Cura, Simplify3D
Connectivity USB cable, USB stick, Wi-Fi, PolarCloud
Power Input AC 100-240V, 47-63Hz
Power Output 24 V, 14.6 A, 350 W
Internal Storage (Gb) 8
Manufacturer Country China
Warranty Period (months) 12
Certifications UL, CE, FC, ISO14001, OHSAS18000, ISO9001
Weight & Dimensions
Weight Netto (kg) 12,2
Dimensions Netto (mm) 406×416×469
Weight Brutto (kg) 16,0
Dimensions Brutto (mm) 500×490×510
Environment Parameters
Operating Temperature Range (°C) 15 - 30

Write a review

Please login or register to review
Cookies
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy