- Stock: In Stock
Available Options
Hyper Speed PLA filament for Raise3D Pro3 Series
PLA for high-speed printing Hyper Speed PLA is one of the specially developed filaments from the line of high-speed materials for FFF 3D printing on Raise3D Pro3 series printers.
During high-speed printing, the rod is quickly fed into the heat block, and the polymer has very little time to go from solid to molten. This speed can cause clogging of the nozzles and poor quality of the connection between the layers. Raise3D Hyper Speed PLA has an optimized molecular weight and adjusted flowability, so it is able to achieve faster melting in the hot end and much faster cooling after exiting the extruder. Thanks to this, the surface quality of parts printed with Hyper Speed filaments is smooth, and most of the sharp parts are preserved. Most importantly, due to its optimized molecular weight, Hyper Speed PLA exhibits excellent interlayer bond quality and strength in the Z-direction. Therefore, Hyper speed PLA can be used for conceptual models and figures, prototyping, etc.
Characteristics of PLA for Hyper Speed printing
- Developed for High Speed FFF printing
- High flowability
- Lower heat capacity
- Easy to print with outstanding surface finish
- Excellent interlayer bonding
- Compatibility with Raise3D support materials: Premium PVA+
- Compatibility with Raise3D printers: Pro3, Pro3 Plus
Hyper Speed PLA application
|
Recommended print settings with Hyper Speed PLA
Nozzle temperature 200 - 230 °C | Bed temperature 45 - 60 °C | Layer height 0,1 - 0,2 mm | |||
Print speed 50 - 300 mm/s | Cooling fan Turned On | Drying temperature 40 °C |
Features of printing with Hyper Speed PLA:
- To improve the quality of parts, it is strongly recommended to use a cooling fan.
- Premium PLA or Hyper speed PLA itself can be used as a removable support material for Hyper Speed PLA.
Buy filament for Hyper Speed PLA Raise3D printing
FDM materials | |
Ø Of Plastic (mm) | 1,75 |
Print Temperature (°C) | Up to 270 |
Material | Hyper Speed PLA |
Density (g/cm3) | 1,21 |
Printing Options | |
Print Temperature (°C) | 200 - 230 |
Bed Adhesive | BuildTak, Blue Tape |
Bed Temperature (°C) | 45 - 60 |
Heated Bed | Necessary |
Closed Chamber | Not required |
Active Cooling Fan (%) | Turned on |
Print Speed (mm/s) | 50 - 300 |
Drying Conditions | 40 °C |
Printer Compatibility | Pro3, Pro3 Plus |
Compatibility | Raise3D Premium PVA+ |
Manufacturer Country | China |
Weight & Dimensions | |
Plastic Weight (kg) | 1,0 |