Menu
Your Cart

Laser Engraving & Cutting Machine xTool D1 5W - Higher Accuracy Diode DIY

High-precision laser engraver and plotter xTool D1 5W

Laser engraver and plotter xTool D1 5W is the best engraving and cutting device of industrial level. An excellent 5W laser device that is suitable for most tasks for businesses, hobbyists, designers, artists, beginners and professionals.

xTool D1 5W combines the best technologies (industrial steel wheel and shaft / tension wheel / synchronous belt / focused laser spot, etc.) that make the carving more precise and the carved works perfect.


Main features of xTool D1 5W

  • Combination of 2 lasers and compression of the laser spot to 0.08×0.08 mm - greater power.
  • Additional rising legs that can be purchased to increase the height and engrave higher objects.
  • The rotary engraving on cylindrical surfaces.
  • Easy focus adjustment.
  • Large engraving area 432×406 mm.
  • Several methods of data transfer.


High precision cutting and engraving with xTool D1 5W

The industrial grade design of the xTool D1 5W engraver allows it to achieve incredible movement accuracy of 0.01mm. And the ultra-fine compressed laser spot size of only 0.08×0.08 mm always shows the best details when engraving or cutting.


Laser engraver and plotter xTool D1 5W to buy available in PolandHigh precision cutting and engraving with xTool D1 5W


Innovative combination of 2 laser beams

The xTool D1 engraver uses the innovative technology combining and compressing of 2 laser beams at one point to make the laser spot smaller and more powerful, from 0.15 × 0.15 mm to 0.08 × 0.08 mm.

In this way, higher power and speed, cutting ability and better effect are achieved for the same power supply indicators. The dual laser power in 10W xTool D1 engraver is equivalent to a single laser cutting machine with a power of 15W.


xTool D1 - Innovative combination of 2 laser beams


Laser engraver and plotter xTool D1 5WEngraving of thin and clear lines up to 0.06 mm

✔ Precise cutting of lines and fewer burn marks

✔ Engraving of thin and clear lines up to 0.06 mm


Additional lifting risers

To expand the capabilities of the xTool D1 5W, you can buy a set of additional risers to increase the height of the engraver. This makes it easier to engrave taller objects (use 2 sets to increase the height to 140 mm).


Additional lifting risers


Easy focus adjustment

The engraver has a convenient tool for 3-step focal length adjustment, it only takes 5 seconds. Pull the initial focus lever down, move the laser slider to bring the focus lever closer to the surface of the material, restore the focus lever.


Easy focus adjustment


Large engraving work area

The large working area of 432×406 mm, which is larger than A3 paper size, allows you to engrave more patterns at the same time and makes your engraver more efficient.


Laser engraver and plotter xTool D1 5W - a large working surface


Several methods of data transfer

The engraver can receive data via Wi-Fi, USB cable, large capacity TF card (offline use). So D1 can work anytime, anywhere.


Several methods of data transfer


Rotary engraving


Laser engraver and plotter xTool D1 5W - rotary engraving


Thanks to a special rotary tool, xTool D1 5W is capable of engraving on a wide range of cylindrical objects. This swivel attachment, which can be purchased separately, helps you create patterns on mugs, baseball bats, bottles, glasses, and more. With 2 sets of risers for engraving on cylindrical materials with a diameter of 105 mm.


Laser engraver and plotter - rotary engraving


All-steel industrial-grade wheels and shaft

Unlike plastic and steel in other laser machines, the all-steel wheels and shaft in the xTool D1 5W allow you to work with a higher accuracy of 0.01 mm. In addition, it supports more than 100,000 slides and has a service life 3 times longer than plastic parts.


xTool D1 5W - Industrial grade all-steel wheels and shaft


Tension wheel and synchronous belt

By tensioning the synchronous belt with the tension wheel adjuster, the movement clearance is well eliminated, the machine vibration is reduced and the movement stability is improved, so that the engraving remains accurate even at high process speeds.

* xTool is the first brand in its class to use closed belts, eliminating the need to loosen and reinstall them.


Engraving thin vector graphics

Moderate timing belt tension is important for movement accuracy. The tension wheel and synchronous belt enable the D1 to engrave excellent vector graphics at high speed.


Laser engraver and plotter xTool D1 - Engraving fine vector graphics


The accuracy of repeated positioning is 0.02 mm

The solid structure design makes the D1 more stable, and the re-positioning accuracy is less than 0.02 mm. Keeps the perfect engraving effect even after long-term use.


xTool D1 5W - Repositioning accuracy 0.02 mm


Cutting wood and acrylic in one pass

Examples of cutting a 10 mm wooden plywood board and a 5 mm acrylic plate in one pass with a 10 W xTool D1 cutter:


Cutting wood and acrylic in one passCutting wood and acrylic in one pass

Cutting wood and acrylic in one passCutting wood and acrylic in one pass


Explore the beauty of acrylic


powerful and ultra-precise engraving and cutting

*Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.


Direct engraving of stainless steel metal


Laser engraver and plotter xTool D1 5W - Direct metal engraving

No plating required - Faster speed - Darker engraved pattern


The best xTool D1 software

Get started quickly with the friendly Laserbox Basic software

The xTool D1 5W engraver and cutter has the convenient Laserbox Basic software, with which you will quickly start working on devices with Windows / macOS / Android / iOS systems.


The best xTool D1 software


Compatible with modern LightBurn engraving software

xTool D1 5W is compatible with LightBurn layout, editing and control software for conventional laser cutter. Supported file formats for engraving: NC, BMP, JPG, PNG, DXF, etc.


xTool D1 5W compatible with LightBurn


Laser engraver and plotter - the embodiment of many ideas


Bringing many ideas to life with xTool D1

The best laser engraver and plotter xTool D1 5W

Laser engraver and plotter xTool D1 5W - the embodiment of many ideas

Laser engraver and plotter xTool D1 5W buy Krakow, Gdansk, Warsaw, Wroclaw


xTool D1 5W Scope of delivery

xTool D1 5W Scope of delivery


Buy xTool laser engraving machine in Poland

The C3D store in Krakow offers a wide range of Laser Engravers and Cutters with delivery throughout Poland. To get a detailed advice and buy an affordable laser engraver, please contact us.


Machine Type Diode Laser Machine
Engraving Area (mm) 432 × 406
Laser Type Diode
Laser Electric Power (W) 25
Laser Output Power (W) 5
Laser Wavelength (nm) 455 ± 5
Laser Spot Size (mm) 0.08 × 0.08
Positioning Accuracy (µm) 10
Routing Speed (mm/s) 160
Max. Workpiece Heigt (mm) 50
Risers Heigt (mm) 45
Supported File Types SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
Operating System Windows, MacOS, iOS, Android
Software Laserbox Software, Laserbox App, LightBurn
Connectivity USB, Wi-Fi, TF Card
Power Input Input: 100-240V, 50-60Hz, 36W. Output: 12V, 3A
Certifications FCC, FDA, CE
Weight & Dimensions
Weight Netto (kg) 5,0
Dimensions Netto (mm) 600 × 590 × 150
Weight Brutto (kg) 6,0
Dimensions Brutto (mm) 620 × 345 × 130

Write a review

Please login or register to review

Videos




Cookies
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy