Menu
Your Cart

3D printer CreatBot F 1000

3D Printer CreatBot F 1000

High-tech, industrial 3D printer with a large build area

  • Build volume 1000*1000*1000 mm.
  • Fully enclosed.
  • Chamber heating, table heating.
  • Heated extruder up to 420 degrees.
  • High resolution and speed.
  • Video camera control technology.


CreatBot F1000 was created to make industrial 3D printing of large objects and prototypes as easy as possible. CreatBot F 1000 3D Printer is an industrial 3D printer that meets the market demand and is equipped with a new intelligent dual extruder kit, closed heated chamber, automatic calibration system and chamber control to produce large quality products. Camera control technology allows customers to control the 3D printing process with an application that can provide the best print quality in the shortest possible time without interruption. With a fast warming platform and hot chamber, this large field workhorse delivers incredible results when using high quality materials.


Smart Dual Extruders 420 °C

The CreatBot F 1000 3D Printer has a new intelligent dual extruder kit with a high temperature of up to 420 °C, it is able to print not only very large products for PLA prototypes at maximum speed, but also high-quality work products from absolutely all types of plastic existing in 3D printing on today: PLA, ABS, PLA +, ABS +, ASA, HPLA, Elastan, Plastan, Primalloy, Flex, TPU, TPE, PMMA, PET, POM, PEEK, PA (Nylon), PA6, Conductive ABS, Flame Retardant, Marble White PLA, Ceramic, Aluminum, Cooper, Bronze, Brass and Gold PLA filaments, Wood, Carbon Fiber, PC, PETG, HIPS, PP, PVA, etc. Dual-Hotend is easy to maintain and available for replacement.


CreatBot F 1000 stability

The one-piece steel housing of the CreatBot F 1000 not only ensures stable printing, but also significantly increases the service life. Optimization and interaction of the overall structure ensures a stable and efficient operation. The first batch of CreatBot 3D printers with an all-steel body worked for 9 years and more than 30,000 hours.


buy 3D printer CreatBot F 1000 Krakow


High Precision Rail Guide 3D Printer CreatBot F 1000

The high precision rail allows you to print models with high precision, 4 ~ 5 times higher than other optical axis 3D printers in the world market. This structure provides accurate filament feeding, allowing large models to be printed quickly and accurately.


Fully enclosed chamber. Heating and drying filaments

A completely enclosed chamber can block all external interference (temperature changes, etc.). In addition, this design can reduce noise while maintaining a constant temperature so that the model does not deform. The camera is heated up to 60 degrees and provides high quality printing for difficult materials such as: ABS, PC, PC-Carbon, PEEK etc. Plastic drying chamber, provides chamber temperature of 45 and 65 ℃ for drying nylon, PC, ABS, PLA and other materials with high water absorption.


Filament detection and resume printing

3D Printer CreatBot F 1000 will automatically remember the current position and save the print data. It will continue to print from the last stopped point after power on.

The printer has a filament control sensor. If filament runs out, CreatBot F 1000 will stop incorrect printing and warn you about it. Then it will be possible to continue 3D printing from the point of stopping.


Video camera control technology

Video camera control technology allows customers to remotely control the 3D printing process by speed, pause, temperature, and so on through the application, which allows you to achieve the best print quality in the shortest possible time without interruption. A very useful feature for large models and long prints.


Automatic platform calibration 

Using 25 dots with BL-Touch sensor to maintain platform flatness initially, with smart Z-compensation table during printing to achieve fully automatic platform alignment.



Printer Options
Printing Technology FDM
Minimum Layer Height (micron) 50
Build Field (mm) 1000*1000*1000
Ø Of Plastic (mm) 1,75
Print Temperature (°C) Above 270
Number Of Extruders 2
Chamber Type Closed
Heating The Chamber Yes
Autocalibration Yes
Feeder Type Direct
Supported Extruders Smart Dual Extruders
Maximum Nozzle Temperature (°C) 420
Printing Accuracy (µm) 100
Print Speed (mm/s) Normal 60, Max 120
Maximum Chamber Temperature (°C) 60
Platform Heating Yes
Maximum Platform Temperature (°C) 100
Platform Material Glass Ceramic Panel
Drying Thread Temperature (°C) 45 / 65
Supported Materials PLA, ABS, PLA +, ABS +, ASA, HPLA, Elastan, Plastan, Primalloy, Flex, TPU, TPE, PMMA, PET, POM, PEEK, PA (Nylon), PA6, Conductive ABS, Flame Retardant, Marble White PLA, Ceramic , Aluminum, Cooper, Bronze, Brass and Gold PLA filaments, Wood, Carbon Fiber, PC, PETG, HIPS, PP, PVA and others. Absolutely all types of plastic existing in 3D printing FDM
Language Multi-language
Control 9.7-inch full color touch screen independent operating system
Body Material Power-Coated Steel, Aluminum Casting for Motion Components, POM
Features Save the date when the printer turned off. The printer will pause if it detects a plastic break. Automatically shutdown the printer after stopping printing. Remote control of the 3D printing process using a built-in video camera in real time
Supported File Types STL, OBJ, AMF, Gcode
Operating System Windows (7,8,10), Mac OS
Software CreatWare, Simplify 3D, Cura, Slice 3r
Power Input 220~240V, 50~60Hz, 4000W
Warranty Period (months) 12
Weight & Dimensions
Weight Netto (kg) 550
Dimensions Assembled (mm) 1740*1300*1920
Weight Brutto (kg) 640
Dimensions Brutto (mm) 1910*1510*2205

Write a review

Please login or register to review
Cookies
In accordance with the GDPR, we need your consent. Find out more at Privacy Policy and the Cookies Policy